Supported Cal Kits
The following list of calibration kits are loaded in the FieldFox. You can add additional calibration kits to the FieldFox using
FieldFox Data Link Software.
The basic 50-ohm QuickCal does not require cal standards. However, for higher accuracy, perform QuickCal with a load. 75-
ohm QuickCal does require a 75-ohm load.
Model number
N9910X-800
N9910X-801
N9910X-802
N9910X-803
85031B
Description
3-in-1 OSL calibration kit, DC to 6 GHz, Type-N (m) 50 ohm
3-in-1 OSL calibration kit, DC to 6 GHz, Type-N (f) 50 ohm
3-in-1 OSL calibration kit, DC to 6 GHz, 7/16 DIN (m)
3-in-1 OSL calibration kit, DC to 6 GHz, 7/16 DIN (f)
Economy calibration kit, DC to 6 GHz, 7 mm
85032E
Economy calibration kit, DC to 6 GHz, Type-N, 50-ohm
Standard calibration kit, DC to 9 GHz, Type-N, 50-ohm
Standard calibration kit, DC to 9 GHz, 3.5 mm
85032F
85033E
85036B
Standard calibration kit, DC to 3 GHz, Type-N 75-ohm
Economy calibration kit, DC to 3 GHz, Type-N 75-ohm
Standard calibration kit, DC to 7.5 GHz, 7-16
85036E
85038A
85039B
Economy calibration kit, DC to 3 GHz, Type-F, 75-ohm
Economy calibration kit, DC to 26.5 GHz, 3.5 mm
85052D
85054B
Standard calibration kit, DC to 18 GHz, Type-N, 50-ohm
Economy calibration kit, DC to 18 GHz, Type-N, 50-ohm
Calibration kit, 4-in-1, open, short, load and through, DC to 9 GHz, Type-N(m), 50
Calibration kit, 4-in-1, open, short, load and through, DC to 9 GHz, Type-N(f), 50
Calibration kit, 4-in-1, open, short, load and through, DC to 3 GHz, Type-N(m), 75 ohm
Calibration kit, 4-in-1, open, short, load and through, DC to 3 GHz, Type-N(f), 75 ohm
85054D
85514A
85515A
85516A
85517A
32
KEYSIGHT [ Keysight Technologies ]
