Network Analyzer
The following CAT mode performance parameters apply to NA mode: frequency accuracy, frequency
resolution, output power, directivity, source match, reflection tracking, and reflection and transmission
dynamic range. NA mode performance that is in addition to CAT mode is listed in the table below.
Specification
Supplemental Information
Frequency Range
Option 104
2 MHz to 4 GHz
2 MHz to 6 GHz
Option 106
Measurement Speed (Sweep time)
S11: 1.75 GHz – 3.85 GHz,1001 Points, Cal ON 1
S21: 1.78 GHz – 2.06 GHz, 201 Points, Cal ON 2
0.4 ms/point (nominal)
1.8 ms/point (nominal)
S11 Phase Uncertainty 3
See Figure 5 on page 12
Display Range
–180º to +180º
System Impedance
50Ω (nominal)
75Ω with appropriate adapter and Cal Kit
1.
2.
3.
1.5 ms/pt; applicable for N9912A with serial number prefix <MY5607/SG5607/US5607 and N9912A not upgraded with Option
N9910HU-500
1.9 ms/pt; applicable for N9912A with serial number prefix <MY5607/SG5607/US5607 and N9912A not upgraded with Option
N9910HU-500
Using recommended calibration kits
10
KEYSIGHT [ Keysight Technologies ]
