Network Analyzer (continued)
Information
Measurements
S11 magnitude and phase
S21 magnitude (Option 110)
A receiver magnitude
R receiver magnitude
Formats
Log magnitude, Linear magnitude
Available ONLY for S11: VSWR, Phase, Smith Chart, Polar, Group delay, Unwrapped phase
Resolution
(Number of data points)
101, 201, 401, 601, 801, 1001, 1601, 4001, 10001
Custom number of points can be set using SCPI
Averaging
Sweep and point averaging; 2 to 999 points.
Four traces available. Tr1, Tr2, Tr3, Tr4
Number of traces
Data markers
Each trace has six independent markers that can be displayed simultaneously. Delta
markers are available for each marker.
Marker formats
Marker functions
Display formats
Default marker format is the trace format. In Smith chart or polar format, [Real +Imag] or
[Mag and Phase] formats are also available.
Peak, Next Peak, Peak Left, Peak Right, Mkr→ Center, Min Search, Peak Excursion, Peak
Threshold, Target, Bandwidth, Tracking
Single-trace
Dual-trace overlay (both traces on one graticule)
Dual-trace split (each trace on separate graticules)
Three-trace overlay (all three traces on one graticule)
Three-trace split (each trace on separate graticules)
Quad-trace split (each trace on separate graticules)
Display data
Trace math
Scale
Display data, memory, data and memory, or data math
Vector division or subtraction of current linear measurement values and memory data.
Autoscale, scale, reference level, reference position
Autoscale: Automatically selects scale resolution and reference value to center the trace.
Autoscale all scales all visible traces.
Title
Add custom titles to the display.
Limit lines
Define test limit lines that appear on the display for go/no go testing. Lines may be any
combination of horizontal, sloping lines, or discrete data points. Each trace can have its
own limit line.
Limit Lines can be Fixed, Relative to center frequency and reference level, and can be built
from existing traces.
11