17 | Keysight | N6841A RF Sensor for Signal Monitoring Networks - Data Sheet
Technical Specifications and Operating Characteristics
Programmatic interface
Sensor Access Library (SAL)
Functions available
C language API supported in both Windows and Linux OS
Over 50 callable routines/functions for sensor control and remote data access
I/Q time series or FFT spectrum data
Data retrieval
Embedded Applications
Allows user defined programs to run autonomously on the RF sensor’s embedded Linux processor (requires SMT
Version 2.0.5 or later)
General
Power requirements
Power consumption
Enclosure
15 - 24 VDC nominal (optional 120/240 VAC indoor adapter)
30 Watts maximum; 25 Watts typical
Sealed Aluminum case
Dimensions
Length
Width
Height
29.2 cm (11.5 in)
24.6 cm (9.7 in)
5.4 cm (2.1 in)
Weight
3.5 kg (7.7 lb)
Connectors
RF input ports (2)
Power
LAN
Type-N (50 ohm) electronically switched
Switchcraft SF6382-2SG-520 standard circular connector
Ethernet RJ45, ruggedized and weatherproof
Type-TNC (female)
GPS
Enclosure rating
IP67 (for ingress of dust and water)
Operating temperature range
–15 ºC to +55 ºC (–31 ºF to 131 ºF) not in direct sunlight; unit is operational to –35 ºC but requires additional heating/
insulation below –15 ºC. All temperature specs assumed at sea level.
Humidity
15 – 95%
Altitude
6400 m (21,000 feet) maximum
EMC Compliance
Complies with the essential requirements of the European EMC Directive
(For more information see the N6841A Declaration of Conformity at: http://regulations.about.keysight.com/DoC)
– IEC/EN 61326, CISPR Pub 11 Group 1, Class A - Industrial locations (Not for Residential)
(Requires a shielded Ethernet, Cat5 cable).
Safety Compliance
ITU-R Compliance
Complies with the essential requirements of the European Low Voltage Directive.
ITU-R SM.377 between 20-6000MHz (frequency and frequency offset measurements)
ITU-R SM.378 (field strength measurements)
ITU-R SM.328 (bandwidth measurements)
Pole-top mount
Rack-mount
7.6 cm (3 inches) maximum diameter pole or rail mount
19 inch rack 2U height
Accessories supplied
Mounting Bracket with assembly hardware to attach and secure the RF Sensor
Ruggedized Ethernet RJ45 connector to attach to RF Sensor
Switchcraft connector for power cable to source RF Sensor
Installation Guide