35 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet
InfiniiMax II Series (Continued)
Performance characteristics
1134A, 1132A, 1131A, 1130A
1134A: > 7 GHz
1132A: > 5 GHz
Bandwidth 1
1131A: > 3.5 GHz
1130A: > 1.5 GHz
1131A: 100 ps
Rise and fall time (10% to 90%)
System bandwidth (–3 dB)
1134A: 60 ps
1132A: 86 ps
1130A: 233 ps
1134A with 90604A: 6 GHz
1132A with 90404A: 4 GHz
1131A with 90254A: 2.5 GHz
Cm = 0.10 pF
Input capacitance 2
Input resistance 1
Cm is between tips
Cg = 0.34 pF
Cg is to ground for each tip
Cdiff = 0.27 pF
Cse = 0.44 pF
Differential mode capacitance = Cm + Cg/2
Single-ended mode capacitance = Cm + Cg
Differential mode resistance = 50 kΩ ± 2%
Single-ended mode resistance = 25 kΩ ± 2%
5.0 V peak to peak, ± 2.5 V
Input dynamic range
Input common mode range
Maximum signal slew rate
6.75 V peak to peak dc to 100 Hz; 1.25 V peak to peak > 100 Hz
18 V/ns when probing a single-ended signal
30 V/ns when probing a differential signal
10:1 ± 3% before calibration on oscilloscope
10:1 ± 1% after calibration on oscilloscope
< 30 mV before calibration on oscilloscope
< 5 mV after calibration on oscilloscope
± 12.0 V when probing single-ended
< ± 1% of setting when probing single-ended
3.0 mV rms
DC attenuation
Zero offset error referred to input
Offset range
Offset accuracy
Noise referred to input
Propagation delay
Maximum input voltage
ESD tolerance
~6 ns (this delay can be deskewed relative to other signals)
30 V peak, CAT I
> 8 kV from 100 pF, 300 Ω HBM
Temperature
Operating: 5 °C to +40 °C
Non-operating: 0 °C to +70 °C
1� Denotes warranted specifications, all others are typical�
2� Measured using the probe amplifier and N5381A solder-in differential probe head�
KEYSIGHT [ Keysight Technologies ]
