09 | Keysight | Infiniium 9000 Series Oscilloscopes - Data Sheet
Widest Range of Debug and Compliance Software Applications: Serial
Protocol-Level
I2C/SPI serial trigger and decode (N5391B or Option 007 on
newscope purchases)
This application displays real-time time-aligned decode of I2C and SPI serial buses�
Hardware-based triggering means triggering reliably, even on the most infrequent
events�
This application works on all models and can use any combination of scope or logic
acquisition channels� For more information: www.keysight.com/ind/9000_I2C-SPI
Trigger and view on-screen serial decode of
RS-232/UART serial decode and trigger (N5462B or Option 001
onnew scope purchases)
I2C packets�
This application eliminates the need to manually decode bus trafic� Using data captured
on the scope or logic channels, the application lets you easily view the information sent
over an RS-232 RS-422, RS-485 or other UART serial buses�
Display real-time time-aligned decode of transmit and receive lines� Hardware-based
triggering means triggering reliably, even on the most infrequent events�
This application works on all models and can use any combination of the scope or logic
acquisition channels� For more information: www.keysight.com/find/9000_RS-232
Trigger on and decode RS-232/UART
transmission�
CAN, LIN and FlexRay triggering and decode (N8803B or
Option 008 on new scope purchases)
Trigger on and view both protocol layer information and physical layer signal
characteristics for CAN, LIN and FlexRay buses� Numerical decode values are
automatically displayed and synchronized below the captured signal or seen in protocol
viewer�
Hardware-based triggering for CAN and LIN means triggering reliably, even on the most
infrequent events� FlexRay uses software-based protocol triggering�
This application works on all models and can use any combination of scope or logic
Trigger on and decode CAN, LIN and
FlexRay serial packets
�
acquisition channels� For more information: www.keysight.com/find/9000_CAN
JTAG (IEEE 1149�1) triggering and decode (N8817B or Option 042 on
new scope purchases)
This application displays real-time time-aligned decode of JTAG (IEEE 1149�1) TDI and
TDO signals� The application eliminate the dificult task of manually determining JTAG
TAP controller states, instruction and data register decode, and lags error conditions�
The application includes scan chain description features including the ability to import
�bsdl iles for each device and displays device names and opcodes in the protocol listing�
This application works on all models and can use any combination of scope or logic
acquisition channels� For more information: www.keysight.com/find/9000_JTAG
Import BSDL files and decode JTAG scan
chain activity�