38 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet
Infiniium S-Series Performance Characteristics (Continued)
Measurements and math
Measurements and math
Math functions can operate on any combination of channels, memories, or other functions
Math functions
Up to 16 independent functions
Gates
Up to 16 (any function can be used as a gate)
Waveform measurements
Waveform memories
Voltage (scope channels)
Can be made on either main, zoom, or gated region with up to 20 simultaneous measurements
Four for scope waveforms, one memory that includes all digital channels simultaneously
Peak-to-peak, minimum, maximum, average, RMS, amplitude, base, top, overshoot, V overshoot, preshoot, V
preshoot, upper, middle, lower, crossing point voltage , pulse top, pulse base, pulse amplitude
Period, frequency, positive width, negative width, duty cycle, delta time
Rise time, fall time, period, frequency, positive width, negative width, duty cycle, Tmin, Tmax, Tvolt, channel-to-
channel delta time, channel-to-channel phase, count pulses, burst width, burst period, burst interval, setup time,
hold time
Time (digital channels)
Time (scope channels)
Mixed (scope channels only)
Frequency domain
Level qualification
Eye-diagram measurements
Measurement modes
Statistics
Area, slew rate
FFT frequency, FFT magnitude, FFT delta frequency, FFT delta magnitude
Any channels that are not involved in a measurement can be used to level-qualify all timing measurements
Eye height, eye width, eye jitter, crossing percentage, Q factor, and duty-cycle distortion
Displays the mean, standard deviation, minimum, maximum range, and number of measurement values for the
displayed automatic measurements
Histograms
Source
Waveform or measurement
Orientation
Vertical (for timing and jitter measurements) or horizontal (noise and amplitude change) modes, regions are defined
using waveform markers
Measurements
Mean, standard deviation, mean ± 1, 2, and 3 sigma, median, mode, peak-to-peak, min, max, total hits, peak (area of
most hits), X scale hits, and X offset hits
Marker modes
Waveform math
Operators
Manual markers, track waveform data, track measurements, and delta marker values can be displayed
Absolute value, add, AM demodulation, average, gating, Butterworth 1, common mode, differentiate, divide,
envelope, FFT magnitude, FFT phase, FIR 1, high pass filter, integrate, invert, LFE 1, low pass filter (4th-order Bessel
Thompson filter), magnify, max, min, multiply, RT Eye 1, smoothing, SqrtSumOfSquare 1, square, square root,
subtract, versus, chart (MSO models)
Automatic measurements
Multipurpose
Measure menu access to all measurements, up to 20 measurements can be displayed simultaneously
User-selectable for saving images when pressed or taking a series of measurements defined by the user, or other
actions
Drag-and-drop measurement
toolbar
Measurement toolbar with common measurement icons that can be dragged and dropped onto the displayed
waveforms
FFT (FFT viewer is standard)
Frequency range
Frequency resolution
Window modes
DC to 10 GHz (at 20 GSa/s) or 5 GHz (at 10 GSa/s)
Resolution = sample rate/memory depth
Hanning, flattop, rectangular, Blackman Harris, Hamming
1. Requires MATLAB software and license.
KEYSIGHT [ Keysight Technologies ]
