17 | Keysight | N5399C, N5399D HDMI Electrical Performance Validation and Compliance Software - Data Sheet
Ordering Information (Continued)
For physical connections to an HDMI device to perform tests with the N5399C HDMI compliance test software, order the following:
Table 3c. HDMI Test Adapter solution ordering information.
Description
Model number
Quantity
Comments
Type A connector plug TPA
Select one:
– Keysight N1080B H04
– HDMIA-TPA-P
– BIT-1010-0200-0
Select one:
1
1
1
Not recommended for edge rates < 70 ps
Available from Wilder Technologies
Available from Bitifeye GmbH
Low frequency DDC/CEC/EDID test adapter
fixture
– VTF-501 FlexEDID
– Keysight N1080B H06
– HDMIA-TPA-E
– BIT-1010-0004-0
BIT-1010-0100-0
BIT-1010-0150-0
Keysight E3630A or 3640A
power supply
1
1
1
1
1
1
1
Vprime (www.vprime.com) – recommended
Wilder Technologies (www.wilder-tech.com)
Available from Bitifeye GmbH
Order from Bitifeye GmbH
Order from Bitifeye GmbH
Or suitable alternative
Type D connector plug TPA
Type E connector plug TPA
Power supply
Power distribution
Termination
Bitifeye BIT-1003-0000-0
Select one:
1
Unit supplies DC power to 5 components
– Wilder HDMI TPA-T
– Keysight N5380B
1
HDMI lanes should be terminated to 3.3 V through
50 Ω resistors when not being tested
1, 2, or 3
– MiniCircuits ZX85-12G-S+ 1 to 6
Note: Bitifeye GmbH is a preferred Keysight integrator.
For HEC and ARC testing using the HDMI test software, order the following:
Table 3d. HEAC solution ordering information.
Model number
N1080B H04
81150AU-EHD
E2678A
1130A
E2697A
81150A
N5990A opt 351
BIT-HDMI-HEAC
Description
HDMI plug test adapter
HEC/ARC test fixture
Differential socketed probes (used with 81150AU-EHD)
Probe amplifiers
High impedance adaptor
Arbitrary waveform generator
HEAC test software option to N5990A factory automation software
Stand-alone HEAC receiver physical layer and audio protocol test software
Quantity
1
1
2
2 (Optional)
2 (Optional)
2 (Optional)
1 (Optional)
1 (Optional)