20 | Keysight | N5393D PCI Express® 3.0 (Gen3) Software for Infiniium Oscilloscopes - Data Sheet
Recommended Test Accessories
To complete your test setup, Keysight provides a wide range of cables, adapters, terminations, etc.
Note: While the PCI-SIG does supply Gen2 test fixtures for motherboard and add-in card testing, you will need to obtain SMP cables,
adapters and terminators from a vendor of your choice as the SIG does not supply them.
Table 2. Recommended test accessories
Model number
Description
Add-in card testing
PCI-SIG Compliance Base Board (order from www.pcisig.com/specifications/ordering_information)
15442A
Two SMA cables
One PC power supply
One power supply load for regulation
Six 50 Ω terminators
1810-0118
System motherboard testing
PCI-SIG Compliance Base Board (order from www.pcisig.com/specifications/ordering_information)
15442A
Two SMA cables
1134A or 1169A
1250-1741
1810-0118
InfiniiMax probe with socketed (E2678A) probe adapter
Two right angle SMA adapters (f - m)
Six 50 Ω terminators
Semiconductor device testing
Customer supplied custom test fixtures with SMAs
15442A
1169A
Two SMA cables
One InfiniiMax probe with differential solder connection (E2677A)
Optional (for all types of testing)
11667B
11636B
1250-1159
8493B
Power splitter, DC to 26.5 GHz, 3.5 mm (f) connectors
Power divider, DC to 26.5 GHz, 3.5 mm (f) connectors
Three SMA (m - m) adapters
Coaxial attenuator (3, 6, 10, 20 or 30 dB), DC to 18 GHz, SMA connector
Matched cable pair, two 90 cm (36 inch) SMA (m - m) cables propagation delay within 25 ps
SMA (m) 50 Ω termination
1810-0118