26 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet
Probes and Accessories Overview
N7020A power rail probe
Do you need more offset than is available in your oscilloscope
frame? Do you need to zoom in to view and analyze small
signals like ripple on top of power rails? Do you need more
input impedance than 50 Ω at DC to make more precise
measurements? If so, the N7020A power rail probe has the
feature set that will help you test more efficiently and precisely.
Developed specifically for power rail testing needs, the probe
delivers 850 mV dynamic range with an impressive offset range
of ± 24 volts. Low noise with a 1:1 attenuation ratio and 2 GHz
bandwidth and low DC loading complements the probes ability to
deliver superior power rail measurements.
Go to www.keysight.com/find/N7020A for additional information.
N2750A Series InfiniiMode active probes
These active probes offer 1.5/3.5/6 GHz bandwidth and
InfiniiMode operation modes and provide convenient and quick
access to various functions on the oscilloscope.
With wide dynamic range (10 Vpp at 10:1) and offset range
(± 15 V), these probes can be used for a vast variety of
measurements.
Go to www.keysight.com/find/InfiniiMode for additional
information.
N2820A Series high-sensitivity current probes
Need to measure small currents? The N2820A Series high-
sensitivity current probes can measure down to 50 uA and up to
5 amps. Combine with the S-Series for lower noise and 10-bit ADC
high-definition current measurements. This probe can also be used
to measure sensitive low voltages down to 3 uV.
Go to www.keysight.com/find/N2820A for additional information.
KEYSIGHT [ Keysight Technologies ]
