29 | Keysight | Infiniium DCA-X 86100D Wide-Bandwidth Oscilloscope Mainframe and Modules - Data Sheet
Ordering Information
Optical/electrical modules
86100D
86100D
Infiniium DCA-X mainframe
Hardware options
86105C
9 GHz optical channel; single-mode and multimode,
amplified (750 to 1650 nm) 20 GHz electrical channel
155 Mb/s through 8.5 Gb/s (choose 4 filter rates from
Options 86105C-110 through 86105C-195)
155 Mb/s
622 Mb/s (also covers 614 Mb/s)
1.063 Gb/s
1.244/1.250 Gb/s (also covers 1.229 Mb/s)
2.125 Gb/s
2.488/2.500 Gb/s (also covers 2.458 Gb/s)
2.666 Gb/s
3.125 Gb/s (also covers 3.072 Gb/s)
4.250 Gb/s
5.0 Gb/s
6.250 Gb/s (also covers 6.144 Gb/s)
8.5, 9.953, 10.3125, 10.519, 10.664, 10.709, 11.096,
11.317 Gb/s
86100D-STR
86100D-ETR
86100DU-ETR Enhanced trigger upgrade kit
Standard trigger
Enhanced trigger
86105C-100
86105C-110
86105C-120
86105C-130
86105C-140
86105C-150
86105C-160
86105C-170
86105C-180
86105C-190
86105C-193
86105C-195
86105C-200
86100D-PTB
Precision timebase integrated in the mainframe
86100DU-PTB Upgrade mainframe with integrated precision timebase
86100D-GPI
86100D-GPN No GPIB card interface
86100D-090
86100D-092
86100D software options
86100D-xxx Are permanent fixed-node licenses installed by the
factory
GPIB card interface installed (default)
Removable hard drive
Internal hard drive (default)
86100DU-xxx Are permanent fixed-node licenses installed by the
customer (software upgrades)
Are permanent transportable licenses installed by the
customer
86100DT-xxx
86105C-300
86105D2
Combination of rates available in 86105C-100 and
86105C-200
20 GHz optical channel; single-mode and multimode,
(750 to 1650 nm); filters for 8.5, 9.953, 10.3125, 10.519,
10.664, 10.709, 11.096, 11.317, 14.025 Gb/s; 35 GHz
electrical channel
The “-xxx” option code provides the same functionality independent of the
prefix (i.e., 86100D or 86100DU or 86100DT)
86100D-BFP
86100D-061
86100D-062
86100D-200
86100D-201
86100D-202
86100D-300
Automatic fixture removal
MATLAB - Basic Oscilloscope package
MATLAB - Standard Oscilloscope package
Enhanced jitter analysis software
Advanced waveform analysis software
Enhanced impedance and S-parameter software
Amplitude analysis/RIN/Q-factor
86105D-100
86105D-200
Identical capability as 86105D, 14.025 Gb/s filter not
included
Identical capability as 86105D, only filter provided is
14.025 Gb/s
86105D-IRC 3 System impulse response correction calibration
86100DU-400 PLL and jitter spectrum software 1
86100D-401
86100D-SIM
86100D-500
86100D-9FP
N1012A
N1014A
N1019A
N1081A
N1082A
Advanced EYE analysis software 1
InfiniiSim-DCA software
Productivity package software
PAM-N analysis software, fixed perpetual license
OIF CEI compliance and debug application
SFF-8431 compliance and debug application
User-defined application
IEEE 802.3 KR/KR4 application
IEEE 802.3bj XLAUI, CAUI-10 and nPPI; IEEE 802.3bm
86105D-281
34 GHz optical channel, filters for 15, 25.78 , 27.95,
28.05 Gb/s (contact Keysight for additional 14.025 Gb/s
filter) 4. 50 GHz electrical channel
1. Fixed node customer installed or transportable customer installed
(86100DU or 86100DT). Not available as a factory-installed license.
2. This module is not compatible with the 86100A and 86100B DCA
mainframes. If you want to upgrade older DCAs, contact Keysight
Technologies to discuss current trade-in deals.
3. System impulse response correction calibration provides a unique
calibration file for the optical channel(s). The FlexDCA user interface uses
this calibration file to create ideal reference receiver responses for more
accurate and consistent transceiver compliance testing. IRC also allows
reference receivers to be defined at any data rate within ± 50% of the
hardware response. This allows optical receivers to significantly extend
their operating range.
CAUI-4 (Option -4TP)
IEEE 802.3 40GBASE-CR4 and 100GBASE-CR10
IEEE802.3 KR4/CR4 application
N1083A
N1084A
N1085A
PAM4 Measurement application for Ethernet and OIF-CEI
4. A 15 Gb/s filter is provided with Option 281 and 282 that closely
approximates the response required for 16X Fibre Channel compliance
testing. Contact Keysight for a special option that verifies compliance
of the 86105D-281 and 86115D-282 to the 16X Fibre Channel reference
receiver specification.
IEEE Measurements option 1TP
OIF-CEI Measurements option 4TP
Misc options
86100D-AFP
86100D-AX4
86100D-AXE
86100D-UK6
Module slot filler panel
Rack mount flange kit
Rack mount flange kit with handles
Commercial cal certificate with test data
86100DU-WN7 Upgrade to Windows 7 operating system
Note:
– Option BFP requires Option 202.
– For complete PAM4 analysis capability, Option 9FP requires Options
200/201/300/401.
– Options 200, 201, and SIM require Option ETR (enhanced trigger).
– Option 300 requires Options 200 and ETR.
– Option 400 requires Microsoft Office Excel 2007/2010.
KEYSIGHT [ Keysight Technologies ]
