13 | Keysight | M9393A PXIe Performance Vector Signal Analyzer – Data Sheet
Technical Specifications and Characteristics
Standard Configuration - Options F08, F14, F18, F27
Dynamic range (cont’d)
Third order intermodulation distortion (TOI)
Frequency
Specification 34
Typical
Nominal
+31 dBm
+33.5 dBm
+30 dBm
+29.5 dBm
+28.5 dBm
+31 dBm
+12.5 dBm
+13 dBm
+4.5 dBm
+4 dBm
Pre-amp OFF 32
10 to 600 MHz
600 MHz to 3.6 GHz
3.6 to 13.6 GHz
13.6 to 16.5 GHz
16.5 to 18 GHz
18 to 27 GHz
+26 dBm / -52 dBc
+26 dBm / -52 dBc
+26 dBm / -52 dBc
+24 dBm / -48 dBc
+21 dBm / -42 dBc
+24 dBm / -48 dBc
+3 dBm / -56 dBc
+4 dBm / -58 dBc
–1.5 dBm / -47 dBc
–4.5 dBm / -41 dBc
–9 dBm / -32 dBc
–7 dBm / -36 dBc
–1 dBm / -48 dBc
+29 dBm
+31 dBm
+29 dBm
+28.5 dBm
+25 dBm
+29 dBm
+8.5 dBm
+10 dBm
+3.5 dBm
+2 dBm
Pre-amp ON 33
10 to 600 MHz
600 MHz to 3.6 GHz
3.6 to 13.6 GHz
13.6 to 16.5 GHz
16.5 to 18 GHz
18 to 24 GHz
–3 dBm
+1 dBm
0 dBm
+3 dBm
24 to 27 GHz
+5 dBm
+7.5 dBm
Second harmonic distortion (SHI)
Frequency
Typical 37
Nominal
+60 dBm
+62 dBm
+44 dBm
+36 dBm
+25 dBm
+35 dBm
+22 dBm
+3 dBm
Pre-amp OFF 35
10 to 300 MHz
300 MHz to 1.8 GHz
1.8 to 5.2 GHz
5.2 to 10 GHz
10 to 13.5 GHz
10 MHz to 1.8 GHz
1.8 to 4 GHz
+56 dBm / –56 dBc
+60 dBm / –60 dBc
+41 dBm / –41 dBc
+32 dBm / –32 dBc
+21 dBm / –21 dBc
+33 dBm / –63 dBc
+16 dBm / –46 dBc
0 dBm / –30 dBc
–10 dBm / –20 dBc
Pre-amp ON 36
4 to 10 GHz
10 to 13.5 GHz
–5 dBm
32. Tone separation = 100 kHz, Expected input level = 3 dBm, Mixer offset level = 0 dB, PeakToAverage = 6 dB, Conversion type Auto.
Signal level of 0 dBm used to calculate distortion in dBc.
33. Tone separation = 100 kHz, Expected input level = –22 dBm, Mixer offset level = 0 dB, PeakToAverage = 6 dB, Conversion type Auto.
Signal level of –25 dBm used to calculate distortion in dBc.
34. TOI = third order intercept. The TOI is given by the input tone level (in dBm) minus (distortion/2) where distortion is the relative level of the
distortion tones in dBc.
35. Expected input level = 0 dBm . Signal level of 0 dBm used to calculate distortion in dBc.
36. Expected input level = –30 dBm . Signal level of -30 dBm used to calculate distortion in dBc.
37. SHI = second harmonic intercept. The SHI is given by the input power in dBm minus the second harmonic distortion level relative to the
input level in dBc.
KEYSIGHT [ Keysight Technologies ]
