28 | Keysight | M9393A PXIe Performance Vector Signal Analyzer – Data Sheet
Technical Specifications and Characteristics
Extended Frequency Configuration - Option FRX
Amplitude
Input level
Without M9169E
+ 17 dBm
With M9169E
Max safe average total power
Max DC voltage
Refer to the M9169E data sheet
± 10 Vdc
Max RF input (recommended)
– 14 dBm
Expected input level setting
Range
Without M9169E
With M9169E
– 170 to – 14 dBm
– 170 to + 30 dBm
Resolution
Same as standard configuration
Attenuator
Not available for this configuration
Mechanical attenuator available with M9169E.
Refer to M9169E data sheet
Absolute amplitude accuracy, nominal 69
Without M9169E 70
With M9169E 71
3.6 to 15 GHz
± 0.15 dB
± 0.20 dB
> 15 to 30 GHz
> 30 to 50 GHz
± 0.39 dB
± 1.58 dB
± 0.38 dB
± 0.83 dB
IF flatness, nominal 72
Frequency
Without M9169E 73
With M9169E
3.6 to 18 GHz
> 18 to 50 GHz
3.6 to 18 GHz
> 18 to 50 GHz
Across any 20 MHz in 40 MHz path
± 0.08 dB
± 0.18 dB
± 0.1 dB
± 0.21 dB
Across any 20 MHz in 160 MHz path
± 0.1 dB
± 0.26 dB
± 0.29 dB
± 0.46 dB
± 0.77 dB
± 0.12 dB
± 0.25 dB
± 0.33 dB
± 0.43 dB
± 0.31 dB
± 0.36 dB
± 0.76 dB
± 1.05 dB
40 MHz
± 0.12 dB
± 0.15 dB
± 0.23 dB
100 MHz
160 MHz
IF phase linearity, nominal 72
Frequency
Without M9169E 73
3.6 to 17 GHz
± 1.57 °
With M9169E
3.6 to 17 GHz
± 1.8 °
> 17 to 50 GHz
> 17 to 50 GHz
Across any 20 MHz in 40 MHz path
± 2.13 °
± 2.17 °
Across any 20 MHz in 160 MHz path
± 1.43 °
± 1.58 °
± 1.88 °
± 2.89 °
± 2.51 °
± 2.3 °
± 3.64 °
± 3.8 °
± 1.39 °
± 1.8 °
± 2.35 °
± 2.62 °
± 4.06 °
± 4.06 °
40 MHz
100 MHz
160 MHz
± 2.38 °
± 2.57 °
IF bandwidth filter switching uncertainty
Same as standard configuration with pre-amp off
69, 70
Expected input level switching uncertainty, nominal
With M9169E
3.6 to 30 GHz
± 0.15 dB
> 30 to 50 GHz
± 0.3 dB
69. Measured using an attenuator with VSWR performance equal to or better than the Keysight 8490D-020 coaxial attenuator. Peak to
average = 0 dB. Applies after comprehensive alignment. Frequency is exclusive on the start frequency and inclusive on the stop frequency.
70. Referenced to expected input level setting of –14 dBm for configuration without M9169E.
71. Referenced to expected input level setting of –5 dBm for configuration with M9169E.
72. Applies after comprehensive alignment. Deviation from the mean error of the entire bandwidth. Expected input level = 0 dBm, Mixer level
offset = 0. Applies for bandwidths where (center frequency ± bandwidth/2) does not exceed the frequency range.
73. Measured using an attenuator with VSWR performance equal to or better than the Keysight 8490D-020 coaxial attenuator.
KEYSIGHT [ Keysight Technologies ]
