07 | Keysight | M9393A PXIe Performance Vector Signal Analyzer – Data Sheet
Technical Specifications and Characteristics
Standard Configuration - Options F08, F14, F18, F27
Frequency (cont’d)
Frequency switching speed 7, 8
List mode switching speed 9
Band
Standard, nominal
Option UNZ, nominal
Baseband frequency offset change 11
< 40 MHz
5 ms
26 µs
12 µs
95 µs
11 µs
≥ 40 MHz to ≤ 100 MHz
> 100 MHz to < 180 MHz
≥ 180 MHz
Arbitrary frequency change within:
0: < 3.6 GHz
5 ms
175 µs
135 µs
135 µs
155 µs
145 µs
1: 3.6 to 8.4 GHz
2: 8.4 to 13.6 GHz
3: 13.6 to 17.1 GHz
4: 17.1 to 27 GHz
Non-list mode switching speed 10
Baseband frequency offset change 11
Arbitrary frequency change
Standard, nominal
Option UNZ, nominal
5 ms
5 ms
250 µs
1 ms
Resolution bandwidth (RBW)
Minimum RBW
1 Hz
Maximum span:RBW ratio 12
Maximum RBW (ENBW)
Flat top (160 MHz IF)
135 x 106
IF dither OFF
31.25 MHz
7.8 MHz
IF dither ON
27.3 MHz
3.9 MHz
Flat top (40 MHz IF)
Gaussian top (160 MHz)
Gaussian top (40 MHz)
19.4 MHz
4.8 MHz
16.99 MHz
2.4 MHz
Video bandwidth (VBW)
Range
1 Hz to maximum RBW and wide open to 50 MHz
Accuracy
VBW is implemented by averaging to achieve a similar variance reduction effect for the same VBW value.
Frequency span
Range
Single FFT: 800 Hz to 160 MHz
Stepped: 800 Hz to 27 GHz
Resolution
2 Hz
7. When used with the M9018A PXIe chassis (2-link configuration: 1 x 8 [factory default]) and M9037A PXIe embedded controller.
8. Settled to within 2 kHz or 1 ppm, whichever is greater of final value. Does not include data acquisition or processing time.
Amplitude settled to within 0.1 dB. Channel filter set to none.
9. Time from trigger input to frequency and amplitude settled. Minimum IQ sample rate ≥ 6 MHz. Minimum spectrum acquisition ≥ 4.8 MHz.
Minimum power acquisition channel filter bandwidth ≥ 4.8 MHz. For frequency changes crossing 3.6 GHz with option UNZ, switching time is 2 ms.
For frequency changes crossing any other bands with option UNZ, switching time is < 300 µs.
10. Mean time from IVI command to carrier frequency settled to within 2 kHz or 1 ppm, whichever is greater. Amplitude settled within 0.1 dB.
Simultaneous carrier frequency and amplitude switching. For frequency changes crossing 3.6 GHz with option UNZ, switching time is 2 ms.
11. Baseband offset can be adjusted ± from carrier frequency within limits determined by RF analysis bandwidth and IF filter bandwidth.
Synthesizer frequency and amplitude are not changing. Baseband offset settled to within 2 kHz.
12. Indicates minimum RBW which can be set for a given measurement span in 64-bit, stepped spectrum acquisition mode.
KEYSIGHT [ Keysight Technologies ]
