18 | Keysight | M9393A PXIe Performance Vector Signal Analyzer – Data Sheet
Technical Specifications and Characteristics
Standard Configuration - Options F08, F14, F18, F27
Time and acquisition
Maximum capture memory 47
Option M01
Memory size
512 MB
2 GB
Non-list mode acquisition limit
128 MSample
List mode acquisition limit
64 MSample
Option M05
512 MSample
256 MSample
Option M10
4 GB
1 GSample
512 MSample 48
Segments
Minimum length
32 bytes
Maximum length
Full capture memory 49
Maximum sample rate
Option B04 / 40 MHz
Option B10 / 100 MHz
Option B16 / 160 MHz
List mode
Specification
50 MS/s complex, 100 MS/s real
125 MS/s complex, 250 MS/s real
200 MS/s complex, 400 MS/s real
Maximum number of segments
Trigger sources
3201
External, magnitude, wideband magnitude, wideband burst, software, immediate
Per acquisition
Trigger modes
Triggering
Delay range 50
−0.1 to +1 s
1 sample
2 ns
Delay resolution
Delay accuracy
Holdoff range
0 to 1 s
Holdoff resolution
Acquisition minimum size
Acquisition maximum size
Timing 51
10 ns
2 samples
1 GSamples
Channel-to-channel synchronization
≤ ± 1 ns, nominal
Repeatability across instrument state changes
< 50 ps, nominal
47. Sample count is based on 32-bit samples. For 64-bit samples, divide by 2.
48. The maximum size for a single list point capture is limited to 512 MSamples (2 GB). However, with option M10, total capture of
up to 3.999 GB is available across all list mode captures.
49. The user can allocate memory for one or more acquisitions. Each acquisition takes up the memory that needs to be a power of 2.
Minimum is 32 bytes.
50 Negative trigger delay limited to capture size.
51. Configured with a Keysight M9018A PXIe chassis for up to 4 channels. Repeatability across power cycles, IVI sessions, and module slot changes.
Chassis FPGA version 1.05 or greater required.
KEYSIGHT [ Keysight Technologies ]
