04 | Keysight | M9362AD01 PXIe Quad Downconverter - Data Sheet
Definitions for Characteristics
Characteristics describe product performance that is useful in the application of the product, but that is not covered by the product
warranty. Characteristics are often referred to as typical or nominal values. All characteristics in this data sheet are typical unless
otherwise noted.
– Typical describes characteristic performance, which 80% of instruments are expected to meet when operated over a 20 to 30 °C
temperature range. Typical performance is not warranted.
– Nominal describes representative performance that is useful in the application of the product when operated over a 20 to 30 °C
temperature range. Nominal performance is not warranted.
Note: All graphs contain measured data from several units at room temperature unless otherwise noted.
General Characteristics
All characteristics are typical unless otherwise noted.
Option F26
Option F40
Option F50
Input and output ports
Connector ports
RF port
Frequency range
Connectors
3.5 mm (f)
3.5 mm (f)
SMA (f)
Frequency range
Connectors
1.85 mm (f)
1.85 mm (f)
SMA (f)
Frequency range
Connectors
1.85 mm (f)
1.85 mm (f)
SMA (f)
0.01 to 26.5 GHz
0.01 to 26.5 GHz
0.01 to 1.5 GHz
0.01 to 40 GHz
0.01 to 40 GHz
0.01 to 1.5 GHz
0.01 to 50 GHz
0.01 to 26.5 GHz
0.01 to 50 GHz
LO port
IF port
Input and output power levels
Frequency range
Input power damage
RF port
0.01 to 26.5 GHz
0.01 to 40 GHz
0.01 to 26.5 GHz
26.5 to 50 GHz
+18 dBm
+5 dBm
+10 dBm
+16 dBm
+10 dBm
LO port
+4 dBm
--
Optimum power levels
RF power
-15 dBm
0 dBm
-15 dBm
+10 dBm
-15 dBm
0 dBm
-20 dBm
LO power
--
RF compression
Ports A-D @ 0.1 dB
Ports A-D @ 1.0 dB
-13 dBm
-7 dBm
-12 dBm
-5 dBm
-10 dBm
-5 dBm
-15 dBm
-10 dBm
KEYSIGHT [ Keysight Technologies ]
