17 | Keysight | M924XA InfiniiVision PXIe Modular Oscilloscopes - Data Sheet
Performance Characteristics (Continued)
WaveGen – Built-in function/arbitrary waveform generator (specifications are typical)
M9241A
M9242A
M9243A
Noise
Bandwidth: 20 MHz typical
Sine cardinal (sinc)
Exponential rise/fall
Cardiac
Gaussian pulse
Arbitrary
Frequency range: 0.1 Hz to 1.0 MHz
Frequency range: 0.1 Hz to 5.0 MHz
Frequency range: 0.1 Hz to 200.0 kHz
Frequency range: 0.1 Hz to 5.0 MHz
Waveform length: 1 to 8k points
Amplitude resolution: 10 bits (including sign bit) 1
Repetition rate: 0.1 Hz to 12 MHz
Sample rate: 100 MSa/s
Filter bandwidth: 20 MHz
Frequency
Sine wave and ramp accuracy:
– 130 ppm (frequency < 10 kHz)
– 50 ppm (frequency > 10 kHz)
Square wave and pulse accuracy:
– [50+frequency/200] ppm (frequency < 25 kHz)
– 50 ppm (frequency ≥ 25 kHz)
Resolution: 0.1 Hz or 4 digits, whichever is larger
Range:
– 20 mVpp to 5 Vpp into Hi-Z
Amplitude
DC offset
– 10 mVpp to 2.5 Vpp into 50 Ω
Resolution: 100 μV or 3 digits, whichever is higher
Accuracy: 2% (frequency = 1 kHz)
Range:
– ± 2.5 V into Hi-Z
– ± 1.25 V into 50 Ω
Resolution: 100 μV or 3 digits, whichever is higher
Accuracy (waveform modes): ± 1.5% of offset setting ± 1% of amplitude ± 1 mV
Accuracy (DC mode): ± 1.5% of offset setting ± 3 mV
Trigger output available on trig out MMCX
Impedance: 50 Ω typical
Trigger output
Main output
Isolation: Not available
Protection: Overload automatically disables output
Normal
Output mode
Single-shot (arbitrary, sine, ramp, sine cardinal, exp rise/fall, cardiac, Gaussian pulse)
1. Full resolution is not available at output due to internal attenuator stepping.
Note: Gaussian pulse: 4 Vpp maximum into Hi-Z; 2 Vpp maximum into 50 Ω.