16 | Keysight | M9195B PXIe Digital Stimulus/Response with PPMU: 250 MHz, 16-channel - Data Sheet
Technical specifications and characteristics
High Voltage Channel Characteristics
Characteristic
Value
Comments
* denotes warranted specification
Drive rise time
<9 ps @ 1 V pp (programmed)
<10 ps @ 3 V pp (programmed)
<11 ps @ 6 V pp (programmed)
Into 50 Ω, 20-80%, Typical
Drive fall time
<9 ps @ 1 V pp (programmed)
<10 ps @ 3 V pp (programmed)
<11 ps @ 6 V pp (programmed)
Into 50 Ω, 20-80%, Typical
Drive source/sink current per channel
±60 mA, nominal
Maximum of 250 mA per module in combination with other
channels
Open Drain Channel Characteristics
Characteristic
Value
Comments
Number of auxiliary open drain channels
Channel type
4
Output only, single-ended, ground
referenced
Channel termination
Open drain
1 A max
Off
Internal 10k Ω pull-up to +5 V
Nominal
Sink current per channel
Channel power-on state
Maximum working voltage
10k Ω pull-up to +5 V
+ 12 Vdc
GP-IO Characteristics
Characteristic
Value
Comments
* denotes warranted specification
Number GP-IO channels
Channel type
2
Trigger In/Marker Out (GPIO 1/2 SMB)
Single ended, ground referenced
Per channel
Direction control
Channel input impedance
Programmable polarity
Programmable threshold setting
Input voltage range
50 Ω or 10 kΩ
Positive or negative slope
Per channel
Software selectable, DC coupled
–2 to + 5 V
Programmable input threshold
Input threshold accuracy
Input minimum pulse width
Input rate
–2 to + 5 V
±100 mV
10 kΩ input impedance
16 ns
DC to 30 MHz
50 Ω
Channel output impedance
Output voltage
Marker
3.3 V max (into high-Z)
Nominal
1.65 V max (into 50 Ω)
Output rate
DC to 100 MHz
<3 ns
Output rise / fall time
Source/sink current per channel
Typical into 50 Ω, 20%-80%
± 64 mA
Nominal
KEYSIGHT [ Keysight Technologies ]
