13 | Keysight | M9195A PXIe Digital Stimulus/Response with PMU: 250 MHz, 16-channel - Data Sheet
Technical specifications and characteristics
Data Channel Characteristics
Characteristic
Value
Comments
* denotes warranted specification
Active termination range
-1.5 V to +6.5 V
50 Ω terminated into VIT
(16-bit with 152 µV resolution)
Active termination accuracy *
Reflection clamp range
±25 mV (VIT)
Maximum accuracy from ±5 ° C of AutoCorrections
-2 V to +7 V
(16-bit with 152 µV resolution)
VCH − VCL > 0.8 V
VCL (-2 V to +6.2 V)
VCH (-1.2 V to +7 V)
Reflection clamp accuracy
±30 mV @ 1 mA (VCH & VCL)
±200 mV @ 10 mA (VCH & VCL)
±400 mV @ 25 mA (VCH & VCL)
50 Ω source impedence into clamps. Characteristic accuracy
from ±5 ° C of AutoCorrections neglecting source impedence
voltage drop
Active load range (IOH & IOL)
0 mA to 25 mA
(16-bit with 762 nA resolution)
Maximum of 250 mA per module in combination with other
channels
Active load accuracy
±0.40 mA (IOH & IOL)
Characteristic accuracy from ±5 ° C of AutoCorrections
Commutation voltage range
-1.5 V to +6.5 V
-1 V to +5.5 V
| IOL & IOH | ≤ 1 mA
| IOL & IOH | ≤ 25 mA
Commutation voltage accuracy
±20 mV (VCOM)
Characteristic accuracy from ±5 ° C of AutoCorrections
High Voltage Channel Characteristics
Characteristic
Value
Comments
* denotes warranted specification
Number of high voltage channels
Channel type
4
Single-ended, ground referenced
Channel control
Shared with dependent data channel
Refer to user manual for HV control information
HV20 shared with CH 02
HV21 shared with CH 06
HV23 shared with CH 10
HV24 shared with CH 14
Channel impedence
<10 Ω (when forcing to terminate)
50 Ω (when forcing High or Low)
Nominal
Channel power-on state
Maximum data rate
Passive 50 Ω termination
10 MHz
Programmable voltage range setting
HV drive range
Per channel
0 V to +13.5 V
Force terminate
(16-bit with 305 µV resolution)
HV drive accuracy *
Drive voltage range
±40 mV (VHH)
Maximum accuracy from ±5 ° C of AutoCorrections
Force high or low
-0.1 V to +6.5 V
(16-bit with 152 µV resolution)
Drive voltage accuracy *
HV drive settling time
±35 mV (VIH & VIL)
Maximum accuracy from ±5 ° C of AutoCorrections
< 4 µs @ 13.5 V pp into 1 M Ω (1nF)
< 350 µs @ 13.5 V pp into 1 M Ω (1nF)
Settled to 1% of final value
Typical
HV channel short circuit current limit
±60 mA, nominal
Maximum of 250 mA per module in combination with other
channels. Nominal