06 | Keysight | PXI Multiplexer Switch Modules M9101A, M9102A, M9103A – Data Sheet
Specifications and Characteristics
M9102A PXI high-density multiplexer
M9102A specifications and characteristics
The M9102A high-density, 128-channel multiplexer features
1-wire, high-speed, long-life reed relays capable of switching
up to 100 Vrms, with up to 20 W of power. The modules’ isolation
switch connects the closed channels to the module common.
Create a larger multiplexer by linking the common connections
on multiple PXI cards. Easily connect the multiplexer with a
high-density, 200-pin low force helix (LFH) connector or cable.
General specifications
Channels
128
Switch type
Max volts1
High-density, 1-wire reed
100 Vrms
Max current switch/carry
Switching characteristics, nominal
Max power
0.5 A/1.0 A
10 W
Switch speed (typical)
1000 usec
400 mΩ
Initial path resistance,
single ended (typical)
Connectors
Bandwidth
200 LFH connector block or cable
5 MHz
DC isolation, Ch-Ch, Ch-Gnd
25C/40%RH (typical)
25C/0%RH (typical)
1x109 Ω
1x108 Ω
1x106 Ω
40C/0%RH (typical)
Thermal offset
Contact factory
Relay life, operations2
Low power load (typical)
Rated power load (typical)
1x109
> 5x106
Figure 4. M9102A 128-ch, 1-wire, reed relays
1. Not for connection to mains.
2. Relay life is defined as path resistance < 1.5 Ω.
KEYSIGHT [ Keysight Technologies ]
