Wide dynamic range. Multiple modulation formats. One sensor.
Now you can use a single power sensor to measure
complex digital modulation formats—including
those used in today’s wireless communication,
satellite, and cable TV systems—at both low and
high power levels. The same E-series power sensor
also measures multi-tone and continuous-wave
(CW) signals.
With all this capability, you can standardize on one
power sensor for all of your average power meas-
urement applications, eliminating the need to
change sensors during measurement tasks and
minimizing the cost of equipment.
Ideal for all your applications
• R&D and manufacturing of RF and microwave
components for satellite, wireless, and terrestri-
al communication systems
There are currently seven E9300 sensors available,
operating from 9 kHz to 18 GHz and -60 to +44 dBm:
• High-volume, automated functional test of
mobile phones, cable TV and video components,
consumer electronics and automotive manufac-
turing
E9300A
E9300B
E9300H
E9301A
E9301B
E9301H
E9304A
10 MHz to 18 GHz
10 MHz to 18 GHz
10 MHz to 18 GHz
10 MHz to 6 GHz
10 MHz to 6 GHz
10 MHz to 6 GHz
9 kHz to 6 GHz
-60 to +20 dBm
-30 to +44 dBm
-50 to +30 dBm
-60 to +20 dBm
-30 to +44 dBm
-50 to +30 dBm
-60 to +20 dBm
2
• EMC measurements to CISPR requirements
(E9304A)
• Maintenance and repair of radio links for terres-
trial and satellite communications from VLF to
microwave, cable TV head-ends and broadcast
TV transmitters
• Aerospace and defense R&D manufacturing, and
service
1
A special option E9304A is available to cover the
frequency range 9 kHz to 18 GHz (E9304A special
option H18). Measurements are fast—up to 200
readings per second—accurate, and repeatable.
E9300 power sensors are bandwidth independent,
so you do not have to worry about matching sensor
bandwidth to the modulation format of your signal
under test. Simply connect the power sensor to the
test signal and begin measuring.
1. The E9304A sensor is DC coupled and has a 5 V DC damage level. All other E9300
sensors are AC coupled and have a 20 V DC damage level specification.
2. Comite International Special des Perturbations Radioelectriques
Agilent E9300 sensors measure the average power of any
signal format.
2
KEYSIGHT [ Keysight Technologies ]
