02 | Keysight | E6567F cdma2000/1xEV-DO/LTE/LTE-A Wireless Test Manager - Technical Overview
Powerful, easy-to-use test automation software that helps you
accelerate the design and manufacturing and quickly achieve
volume production of multi-format W-CDMA/GSM/GPRS/EGPRS
and LTE FDD/TDD wireless devices
– Occupied bandwidth (OBW)
– Open loop power control
– Phase discontinuity
– Spectrum emission mask (SEM)
– Transmit on/off power
– Waveform quality
Tests Supported
– HSDPCCH test
– Base station emulation control
LTE/LTE-A transmitter tests
– Minimum output power
– Maximum output power
W-CDMA/HSPA/HSPA+/DC-HSDPA receiver
tests
– Aggregate power control tolerance
– EVM equalizer spectrum flatness
– Occupied bandwidth
– Additional maximum power reduction
– Configured UE transmitted output power
– Spectrum emission mask
– Additional spectrum emission mask
– PRACH time mask
– SRS time mask
– Power control absolute power tolerance
– PUSCH-EVM with exclusion period
– In-band emissions for non-allocated RB
– Maximum power reduction
– Frequency error
– Maximum input level (BER)
– Reference sensitivity level (BER)
– BLER
GSM/GRPS/EGPRS call processing
– GSM MS and BS origination
– GSM MS and BS release
– GPRS mobile-initiated attach and detach
– GPRS and EGPRS packet data transfers on uplink and down-
link
– Channel, band, and format changes with continuous attach/
camp
– Short message service (SMS)
– Error vector magnitude
– Carrier leakage
– Adjacent channel leakage power ratio
– General ON/OFF time mask
GSM/GRPS/EGPRS transmitter tests
– GSM/GPRS/EGPRS Tx power
– EGPRS modulation accuracy
LTE/LTE-A receiver tests
– GSM/GPRS/EGPRS phase and frequency error
– Power versus level
– GSM/GRPS/EGPRS burst timing error
– GSM/GPRS/EGPRS output RF spectrum
– GSM/GPRS/EGPRS power versus time
– Reference sensitivity level
– Maximum input level
– Adjacent channel selectivity (ACS)
– In-band blocking
– Reference sensitivity level for CA
– Maximum input level for CA
– LTE tiered Rx sensitivity search
– LTE tiered Rx sensitivity search at UE
GSM/GRPS/EGPRS receiver tests
– GSM fast BER
– GSM BER
– GSM/GPRS BER
– GPRS/EGPRS BLER
– EGPRS SRB bit error
– Rx level and quality report
W-CDMA/HSPA/HSPA+/DC-HSDPA
call processing
– Base station (BS) originate/release call
– Mobile registration
– Mobile originate (AMR mode)
– Change channel
General tests
– Current drain
– W-CDMA to GSM handoff
– Short message service (SMS)
– GSM voice quality
– Data analyzer
– Keysight 14565B device characterization software control
– GPIB command send/receive
– DUT command send/receive
– LAN command send/receive
W-CDMA/HSPA/HSPA+/DC-HSDPA
transmitter tests
– Adjacent channel leakage power ratio (ACLR)
– Inner loop power control
– Maximum output power
– Minimum output power