03 | Keysight | E6567F cdma2000/1xEV-DO/LTE/LTE-A Wireless Test Manager - Technical Overview
1xEV-DO transmitter test
Adapters
(Applies to Release 0, A, and B)
– Keysight 82357A USB/GPIB interface
– National Instruments GPIB-USB-A external controller
– Waveform quality
– Code domain accuracy
– Transmitter spurious emissions
– Data, RRI, DRC, and ACK channel output power
– Maximum output power
– Access probe open loop power
– Minimum controlled output power
– Closed loop power control
PC cards
– Keysight GPIB
– National Instruments GPIB
– Advantech PCI 1750 E6567F-1TP
– Control RocketPort 95870-3 and 99096-3 multi-port
serial card
– Time response for open loop power control
Peripherals
1xEV-DO receiver tests
– Symbol LS-1220-1200A fixed bar code reader
– Symbol LS-3603MX-1200A, P300FZY, and LS40041-I100
handheld bar code reader
(Applies to Release 0, A, and B)
– Traffic channel PER with AWGN
– Receiver sensitivity and dynamic range
– HP printers
– Epson TM-U200D and TM-U200D strip printer
General tests
PC requirements
– Current drain
– Start loop
– End loop
– Operating system: Microsoft Windows 7 Professional and
Enterprise
– Microsoft Visual Studio.NET
– Microsoft Internet Explorer Version 6.0 or later
– 600 MHz Pentium III or higher (1 GHz Pentium III or higher for
extended capability)
– Send/Receive GPIB command
– Data analyzer
– Send/Receive DUT command
– Keysight 14565B device characterization software control
– 512 MB RAM minimum (1024 MB is recommended for normal
development and is required for extended capability operation)
– 200 MB free hard drive space
Hardware Supported
– CD-ROM
– GPIB card or converter with VISA drives (one per test system)
– LAN port for remote control of UXM
Test instruments
– E7515A UXM wireless communications test set
– E7530A LTE test application and E7630A LTE lab application
– Keysight 8960 Series 10 wireless communications test set
– E5515E or E5515C mainframe (or equivalent E5515B/T)
with Option 003
– Serial ports for fixtures, device control, and bar code reader
Order Information
– E1962B cdma2000®/IS-95/AMPS mobile test application
(revision B.15.18 or later)
– E1966A 1xEV-DO test application (revision A.10.18 or
later)
– E1987A GSM/GPRS/EGPRS, AMPS/136, cdma2000,
1xEV-DO, W-CDMA fast switching mobile test application
(revision A.09.21 or later)
– E6567F cdma2000/1xEV-DO/LTE/LTE-A Wireless Test Manager
– E6567F-1TP transportable perpetual license, development, and
run time version for E6567F
– E6569F Wireless Test Manager suite, including E6567F and
E6568F
– E6569F-1TP transportable perpetual license, development, and
run time version for E6567F and E6568F
– E6571F Wireless Test Manager run-time license
– E6571F-1TP transportable perpetual license, run time only ver-
sion for both E6567F and E6568F
– Keysight 66311B, 66319B, and 66321B power supplies
– Keysight 34970A with 34901A, 34903A, and 34907A data
acquisition/switch unit
– E6567FU upgrade existing E6567x to E6567F
– E6567FU-1TP transportable perpetual license, development, and
run time version for E6567x upgrade to E6567F
– E6571FU upgrade existing E6571x to E6571F
– E6571FU-1TP transportable perpetual license, run time only
version for upgrade E6567x and E6568X to E6567F and E6568F
respectively
Fixtures
Tescom TC-5941, TC-5942, and TC-5952B
KEYSIGHT [ Keysight Technologies ]
