08 | Keysight | Probing Solutions for Logic Analyzers - Data Sheet
Probe Selection Guide for All Keysight Logic Analyzers (Continued)
40-pin probes selection guide
Compatible with Keysight models 16910A/11A, 16800 Series, 16750/51/52A/B, 1674X Series, 1671x Series, 165xx Series modules,
1690 Series, 1680 Series, 1670 Series, 1660 Series, 1650 Series, and E9340 logic analyzers.
Soft touch connectorless probes
Supplied with five retention modules
General purpose
flying lead set
E5383A
Samtec probe
E5385A
Mictor probe
E5346A
Model number
E5396A
E5404A
E5394A
Application
Quick connection to many channels in a small footprint without a Quick connection
header designed into the target system
Quick connection
to many signals in a to many signals in a to individual
Flexible connection
small footprint
34
32 data, 2 clock
small footprint
34
32 data, 2 clock
signals
17
16 data, 1 clock
Number of
channels
17
34
34
16 data, 1 clock
32 data, 2 clock
32 data, 2 clock
Supported signal
types
All probes: single-ended clock, single-ended data
Maximum data
rate
> 2.5 Gb/s
> 2.5 Gb/s
> 2.5 Gb/s
1.5 Gb/s
Equivalent to the
logic analyzer data logic analyzer data
Equivalent to the
rate the probe is
attached to
500 mV p-p1
rate the probe is
attached to
600 mV p-p
Minimum signal
amplitude
500 mV p-p
500 mV p-p
500 mV p-p
500 mV p-p
Connection to
target system
Requires half-size
soft touch footprint
designed into the
target
Requires Pro
Series soft touch
footprint designed designed into the
into the target
Requires original
soft touch footprint Samtec connector
Requires 100-pin
Requires 38-pin
Mictor connector
designed into the
target system2
Compatible with a
wide assortment
of accessories
to connect to
individual leads
1.5 pF
See Figure for
additional leads
and grabbers
designed into the
target system
target
Input capacitance < 0.7 pF
Additional supplies Additional five
retention modules
< 0.7 pF
Additional five
retention modules retention modules
< 0.7 pF
Additional five
1.5 pF
3.0 pF
See Table 1 for PC
board connectors
and shrouds
See Table 1 for pc
board connectors
and shrouds
Orderable as
Order kit
Order kit E5403A
Order kit
E5396-68702
E5387-68701
1. Model E5339A low voltage Mictor probe = 250 mV p-p.
2. Model E5351A Unterminated Mictor probe requires isolation networks to be provided on the target system. See page 64 for details.
KEYSIGHT [ Keysight Technologies ]
