69 | Keysight | Probing Solutions for Logic Analyzers - Data Sheet
Probing Solutions for 40-pin Logic Analyzers
Mictor and Samtec Probing (Continued)
Right-angle Mictor adapter
For systems with space constraints above
the 38-pin connector, Keysight offers a
right-angle adapter, as shown in Figure
9.34. With the E5346-63201 right-angle
adapter inserted in the 38-pin connector,
the adapter cable is connected parallel
to the target board surface. When using
the right-angle adapters, the 38-pin
connectors must be placed end-to-end
on the target board, as shown in Figure
9.35. Support shrouds cannot be used
with the right-angle adapter.
0.575 in
14.61mm
0.758 in
19.26 mm
0.382 in
9.69 mm
1.00 in
25.40 mm
Figure 9.34. E5346-63201 right-angle 38-pin adapter.
Note: The right-angle adapter adds significant
capacitance and inductance in series with the
probe. It is not recommended for state speeds
above 100 MHz or for signals with rise times
< 4 to 5 ns.
Figure 9.35. 38-pin connectors placed for use of right-angle adapter.
KEYSIGHT [ Keysight Technologies ]
