15 | Keysight | E5080A ENA Series Network Analyzer, E5092A Configurable Multiport Test Set - Data Sheet
Description
Typical
General characteristic
Internal reference signal oven connector
(option 1E5)
Type
BNC, female
Output frequency
Output level
10 MHz ± 0.45 ppm
0 dBm minimum
Bias tee input connector
Type
BNC, female
Damage level
± 35 V, 500 mA DC
Max. current
± 300 mA at 100 kHz to 9 GHz
(no degradation in RF specifications)
Over current protection
500 mA (with Fuse)
Video output
15-pin mini D-Sub; female; drives WXGA
compatible monitors
GPIB
24-pin D-Sub (Type D-24), female; compatible
with IEEE-488
USB host port
Universal serial bus jack, Type A configuration;
female; provides connection to mouse, key board,
printer, ECal module, USB power sensor, or USB/
GPIB interface
USB (USBTMC1) interface port
Universal serial bus jack, Type B configuration
(4 contacts inline); female; provides connection
to an external PC; compatible with USBTMC-
USB488 and USB 2.0.LA
LAN
10/100BaseT Ethernet, 8-pin configuration; auto
selects between the two data rates
Handler I/O port
36-pin centronics, female; provides connection
to handler system
Line power2
Frequency
Power consumption 3
47 Hz to 63 Hz
2-port: 135 W
4-port: 165 W
Voltage
VA max
90-264 VAC (Vpeak > 120 V)
300 VA max.
1. USB Test and Measurement Class (TMC) interface that communicates over USB, complying with the IEEE 488.1 and IEEE 488.2 standards.
2. A third-wire ground is required.
3. At preset.
Description
Specification
Typical
AUX input connector
Type
BNC, female x 2 ports
Input range
Accuracy
± 1 V or ± 10 V selectable
1 % ± 1 mV for 1 V input range
1 % ± 10 mV for 10 V input range