02 | Keysight | E5061B Network Analyzer, 100 kHz to 1.5/3 GHz, 5 Hz to 500 M/1.5 G/3 GHz - Data Sheet
Definitions
All specifications apply over a 23 °C ± 5 °C range (unless otherwise stated) and
90 minutes after the instrument has been turned on.
Specification (spec.)
Warranted performance. Specifications include guardbands to account for the expected
statistical performance distribution, measurement uncertainties, and changes in
performance due to environmental conditions.
Supplemental information is intended to provide information that is helpful for using the
instrument but that is not guaranteed by the product warranty.
Typical (typ.)
Describes performance that will be met by a minimum of 80% of all products. It is not
guaranteed by the product warranty.
Supplemental performance data (SPD)
Represents the value of a parameter that is most likely to occur; the expected mean or
average. It is not guaranteed by the product warranty.
General characteristics
A general, descriptive term that does not imply a level of performance.
Boundary Conditions
If the same boundary conditions fall under more than one category in the table, apply the
best value.
E5061B Test Set Options
50 Ω RF NA options
E5061B-115
E5061B-215
E5061B-135
E5061B-235
75 Ω RF NA options
E5061B-117
E5061B-217
E5061B-137
E5061B-237
LF-RF NA option
E5061B-3L3
E5061B-3L4
E5061B-3L5
Transmission/Reflection test set, 100 kHz to 1.5 GHz, 50 Ω system impedance
S-parameter test set, 100 kHz to 1.5 GHz, 50 Ω system impedance
Transmission/Reflection test set, 100 kHz to 3 GHz, 50 Ω system impedance
S-parameter test set, 100 kHz to 3 GHz, 50 Ω system impedance
Transmission/Reflection test set, 100 kHz to 1.5 GHz, 75 Ω system impedance
S-parameter test set, 100 kHz to 1.5 GHz, 75 Ω system impedance
Transmission/Reflection test set, 100 kHz to 3 GHz, 75 Ω system impedance
S-parameter test set, 100 kHz to 3 GHz, 75 Ω system impedance
LF-RF network analyzer with DC bias source, 5 Hz to 500 MHz
LF-RF network analyzer with DC bias source, 5 Hz to 1.5 GHz
LF-RF network analyzer with DC bias source, 5 Hz to 3 GHz
KEYSIGHT [ Keysight Technologies ]
