欢迎访问ic37.com |
会员登录 免费注册
发布采购

E4991B 参数 Datasheet PDF下载

E4991B图片预览
型号: E4991B
PDF下载: 下载PDF文件 查看货源
内容描述: [Impedance Analyzer]
分类和应用:
文件页数/大小: 42 页 / 7850 K
品牌: KEYSIGHT [ Keysight Technologies ]
 浏览型号E4991B的Datasheet PDF文件第6页浏览型号E4991B的Datasheet PDF文件第7页浏览型号E4991B的Datasheet PDF文件第8页浏览型号E4991B的Datasheet PDF文件第9页浏览型号E4991B的Datasheet PDF文件第11页浏览型号E4991B的Datasheet PDF文件第12页浏览型号E4991B的Datasheet PDF文件第13页浏览型号E4991B的Datasheet PDF文件第14页  
10 | Keysight | E4991B Impedance Analyzer - Data Sheet  
Measurement Support Functions (continued)  
Open/short compensation:  
When a device is connected to a terminal that is extended from the calibration  
reference plane, make open and/or short states at the device contact and measure  
each kind of compensation data.  
Calibration/compensation data measurement point  
Fixed frequency mode:  
Obtain calibration/compensation data at fixed frequency covering the entire frequency  
range of the E4991B. In device measurement, calibration or compensation is applied  
to each measurement point by using interpolation. Even if the measurement points  
are changed by altering the sweep setups, you don’t need to retake the calibration/  
compensation data.  
User-defined frequency mode:  
Obtain calibration/compensation data at the same frequency as used in actual device  
measurement, which are determined by the sweep setups. Each set of calibration/  
compensation data is applied to each measurement at the same frequency point. If the  
measurement points are changed by altering the sweep setups, calibration/compensa-  
tion data become invalid and retaking calibration/compensation data is recommended.  
Trigger  
Trigger mode:  
Internal, external (external trigger input connector), bus (GPIB/LAN/USB), manual  
(front key)  
Averaging  
Types:  
Sweep-to-sweep averaging, point averaging  
Setting range:  
Sweep-to-sweep averaging: 1 to 999 (integer)  
Point averaging: 1 to 999 (integer)  
Display  
LCD display :  
Type/size: 10.4 inch TFT color LCD  
Resolution: XGA (1024 x 768)1  
Number of traces:  
Data trace: 4 data traces per channel (maximum)  
Memory trace: 4 memory traces per channel (maximum)  
Trace data math:  
Data + Memory, Data - Memory, Data x Memory, Data/ Memory, Offset, Equation  
Editor  
Format:  
For scalar parameters: linear Y-axis, log Y-axis  
For complex parameters: Z, Y, [r, µr: polar, complex; G:  
polar, complex, Smith, admittance  
1. Valid pixels are 99.99% and more. Below 0.01% of fixed points of black, green, or red are not  
regarded as failure.  
 复制成功!