19 | Keysight | E4980A Precision LCR Meter 20 Hz to 2 MHz, E4980AL Precision LCR Meter 20 Hz to 300 kHz/500 kHz/1 MHz – Data Sheet
Frequency options
Options
E4980A
20 Hz to 2 MHz
20 Hz to 300 kHz
20 Hz to 500 kHz
20 Hz to 1 MHz
Note
E4980AL-032
E4980AL-052
E4980AL-102
Option xxx is described as E4980A-xxx in the
order information
Table 30. Installable options
Options
E4980A
E4980AL
Power and DC bias enhancement (001)
Bias Current Interface (002)
Entry model (005)
Installable
Installable
Installable
Installable
Installable1
Installable
Installable
Not installable
Not installable
Not installable
Not installable
Not installable2
Not installable
Not installable
Standard model (007)
DCR measurement (200)
Handler interface (201)
Scanner interface (301)
Interface options
Option 002 (Bias current interface)
Adds a digital interface to allow the E4980A to control the 42841A’s bias current source.
Option 201 (Handler interface)
Adds handler interface.
Option 301 (Scanner interface)
Adds scanner interface.
Option 710 (No interface)
An option with no interface.
Up to 2 interface options can be installed in the interface connector on the rear panel.
When no interface is installed, two of the option 710 are installed. When one interface is
installed, the option number of its interface and one option 710 are installed.
Other options
Option 001 (Power and DC Bias enhancement)
Increases test signal voltage and adds the variable DC bias voltage.
Option 005 (Entry model)
Low-priced option that requires a longer measurement time. The level of measurement
accuracy is the same as the standard.
Option 007 (Standard model)
Note
Upgrades the entry model to the standard.
Option 007 can be installed only in the E4980A
with option 005.
Option 200 (DCR measurement)
Adds DCR measurement
Note
E4980A-200/001 and E4980AL-032/052/102
supports DCR measurement function.
1. Mandatory option
2. DCR measurement function is equipped
by default.