32 | Keysight | InfiniiVision 4000 X-Series Oscilloscopes - Data Sheet
Oscilloscope Experience Redefined:
InfiniiVision 4000 X-Series Performance Characteristics (Continued)
Dual-channel WaveGen built-in function/arbitary waveform generator (specifications are typical)
Sine
Frequency range
Amplitude flatness
Harmonic distortion
Spurious (non harmonics)
Total harmonic distortion
SNR (50-Ω load, 500-MHz BW)
Frequency range
Duty cycle
0.1 Hz to 20 MHz
± 0.5 dB (relative to 1 kHz)
–40 dBc
–40 dBc
1%
40 dB (Vpp ≥ 0.1 V); 30 dB (Vpp < 0.1 V)
0.1 Hz to 20 MHz
20 to 80%
Square wave/pulse
Duty cycle resolution
Rise/fall time
Overshoot
Larger of 1% or 10 ns
19 ns (10 to 90%)
< 2%
Asymmetry (at 50% DC)
Jitter (TIE RMS)
Frequency range
Linearity
Variable symmetry
Symmetry resolution
Frequency range
Pulse width
± 1% ± 5ns
500 ps
0.1 Hz to 200 kHz
1%
0 to 100%
Ramp/triangle wave
Pulse
1%
0.1 Hz to 10 MHz
20 ns minimum
Pulse with resolution
Edge time
Overshoot
10 ns
Fixed at 19 ns (not variable)
< 2%
Noise
Bandwidth
20 MHz typical
Sine cardinal (Sinc)
Exponential rise/fall
Cardiac
Gaussian pulse
Arbitrary
Frequency range
Frequency range
Frequency range
Frequency range
Waveform length
Amplitude resolution
Repetition rate
0.1 Hz to 1.0 MHz
0.1 Hz to 5.0 MHz
0.1 Hz to 200.0 kHz
0.1 Hz to 5.0 MHz
1 to 8,192 points
10 bits (including sign bit) 2
0.1 Hz to 12 MHz
100 MSa/s
Sample rate
Filter bandwidth
Sine wave and ramp accuracy
20 MHz
Frequency
Amplitude
130 ppm (frequency < 10 kHz)
50 ppm (frequency > 10 kHz)
[50 + frequency/200] ppm (frequency < 25 kHz)
50 ppm (frequency ≥ 25 kHz)
0.1 Hz or 4 digits, whichever is larger
20 mVpp if |offset| ≤ 0.5 Vpp into Hi-Z 1
10 mVpp if |offset| ≤ 0.5 Vpp into 50 Ω 1
Square wave and pulse accuracy
Resolution
Range: Minimum
Range: Maximum
10 Vpp except, 9 Vpp if Sinc or Cardiac, 7.5 Vpp if Gaussian
pulse into Hi-Z; 5 Vpp/4.5 Vpp into 50 Ω
Resolution
Accuracy
100 μV or 3 digits, whichever is higher
1.5% (frequency = 1 kHz)
1� Sinc, cardiac and Gaussian pulse: ± 1.25 V into Hi-Z; ± 625 mV into 50 Ω.
2. Full resolution is not available at output due to internal attenuator stepping.