19 | Keysight | Infiniium 9000 Series Oscilloscopes - Data Sheet
Infiniium 9000 Series Performance Characteristics
Vertical: Scope channels
Analog bandwidth (–3 dB)
50 Ω 1
9064A
9104A
9254A
9404A
600 MHz
500 MHz
540 ps
1.0 GHz
500 MHz
253 ps
2.5 GHz
500 MHz
142 ps
4 GHz
500 MHz
85 ps
1 MΩ
Typical rise time/Fall
Time 10 to 90% at 50 Ω
Typical rise time/Fall
Time 20 to 80% at 50 Ω
360 ps
174 ps
98 ps
59 ps
Input channels
DSO9000 – 4 analog
MSO9000 – 4 analog + 16 digital
50 Ω ± 2.5%, 1 MΩ ± 1% (11pF typical)
1 MΩ: 1 mV/div to 5 V/div
50 Ω: 1 mV/div to 1 V/div
1 MΩ: AC (3.5 Hz), DC
Input impedance 1
Input sensitivity 3
Input coupling
50 Ω: DC
Bandwidth limit
Vertical resolution 2, 3
Channel-to-channel isolation
20 MHz on 1 MΩ input; 500 MHz up to full scope bandwidth in increments of 500 MHz
8 bits, ≥ 12 bits with averaging
DC to 50 MHz: 50 dB
> 50 MHz to 2.5 GHz: 40 dB
> 2.5 GHz to 4 GHz: 25 dB
± 2% of full scale at full resolution on channel scale ± 5 ºC from cal temp
1 Mv: 150 V RMS or DC, CAT I
DC gain accuracy 1, 2, 3
Maximum input voltage 1
± 250 V (DC + AC) in AC coupling
50 Ω: 5 Vrms
Offset range
– 1 MΩ
Vertical sensitivity
1 mV to < 10 mV/div
10 mV to < 20 mV/div
20 mV to < 100 mV/div
100 mV to < 1 V/div
1 V to 5 V/div
Available offset
± 2 V
± 5 V
± 10 V
± 20 V
± 100 V
– 50 Ω
± 12 div or ± 4 V, whichever is smallest
1� Denotes warranted specifications, all others are typical� Specifications are valid after a 30-minute warm-up period and ± 5 °C from firmware calibration
temperature�
2� Input impedance is valid when V/div scaling is adjusted to show all waveform vertical values within scope display�
3� Vertical resolution for 8 bits = 0.4% of full scale, for 12 bits = 0.024% of full scale.50 Ω input: Full scale is defined as 8 vertical divisions. Magnification is
used below 10 mV/div, full-scale is defined as 80 mV� The major scale settings are 5 mV, 10 mV, 20 mV, 50 mV, 100 mV, 200 mV, 500 mV, 1 V�
1 M Ω input: Full scale is defined as 8 vertical divisions. Magnification is used below 5 mV/div, full-scale is defined as 40 mV. The major scale settings are
5 mV, 10 mV, 20 mV, 50 mV, 100 mV, 200 mV, 500 mV, 1 V, 2 V, 5 V�