13 | Keysight | CX3300 Series Device Current Waveform Analyzer - Data Sheet
You can find the best connection interface for your DUT from the six sensor head
adapters that can be easily and safely attached to and detached from the current
sensors (CX1101A and CX1102A only. Not available for CX1103A). The SMA connector
type adapters enable wideband measurements, while twisted pair and test lead adapters
are quite useful for quick current waveform measurements that do not necessarily need a
wide bandwidth.
Figure 32. CX1206A and CX1101A. Even when you
evaluate low power devices, you may occasionally
need to measure higher current at more than
1 A. The CX1206A sensor head with expander
enables CX1101A current sensor to measure from
3 mA to 10 A current waveforms based on the
ESL (Effective Series Inductance) reduced shunt
resistor technology.
CX1201A
CX1202A
CX1203A
CX1206A (for
up to 10 A)
CX1204A
CX1205A
Figure 29. CX120XA Sensor head adaptors
Attaching a sensor head to a current sensor is quite simple, requiring no extra effort.
Connecting a sensor to a mainframe channel is also a simple process, by firmly screwing
in the adapter. All these connections are hot swappable.
(30b)
(30a)
Figure 30a and 30b. Attaching a sensor head to a current sensor
(31a)
(31b)
Figure 31a and 31b. Connecting a sensor to a mainframe channel
KEYSIGHT [ Keysight Technologies ]
