24 | Keysight | CX3300 Series Device Current Waveform Analyzer - Data Sheet
Table 21. CX1101A other characteristics
Rise time (10% to 90%)
Input common mode impedance 1
Measurable over range
Burden voltage
0.35 / Bandwidth [MHz]
750 MΩ // 31 pF (Nominal)
10% of range
RIN * Measured current
±40 V
Peak voltage (DC + AC) limit
Maximum input voltage (common mode) 2
AC voltage limit
Range
10 A
±5 V above 1 MHz
Protection
No fuse protected
1 A
200 mA
20 mA
2 mA
Absolute maximum input current
1.5 A fuse protected 3
200 μA
20 μA
50 mA fuse protected
1. Measured with a CX1201A. Both inputs has this same input impedance. When using a CX1203A Sensor Head, the minus (-)
terminal is internally connected to the circuit common through a 10 MΩ resistor.
2. For all current measurement ranges.
3. CX1203A with 50 Ω setting: 70 mA maximum, 125 mA fuse protected.
Table 22. CX1101A general information 1
Cable length
Dimension 2
Weight
Sensor cable: 1.5 m, Gnd lead: 16 cm
46.8 mm (W), 31.9 mm (H), 205.3 mm (D)
400 g
1 each Coaxial Termination Adapter Sensor Head (CX1203A)
1 each SMA(P) to BNC(J) 50 Ω Coaxial Adapter
1 each GND lead
Furnished accessories
1. Refer to mainframe’s “Environmental and general” part for other information.
2. CX1203A Sensor Head is included. Cable and adapter are not included.
KEYSIGHT [ Keysight Technologies ]
