30 | Keysight | Infiniium DCA-X 86100D Wide-Bandwidth Oscilloscope Mainframe and Modules - Data Sheet
Ordering Information (Continued)
Optical/electrical modules (Continued)
Dual/Quad electrical channel modules
86112A Dual 20 GHz electrical channels
86112A-HBW Dual 30 GHz electrical channels
86115D 2
20 GHz multi-optical port plug-in module; single-mode
and multimode (750 to 1650 nm); filters for 8.5, 9.953,
10.3125, 10.519, 10.664, 10.709, 11.096, 11.317, 14.025
Gb/s
86118A
Dual 70 GHz electrical remote sampling channels
86118A-H01
Differential de-skew
2/4 port 60 GHz electrical remote head
2 channel remote head, 1.85 mm, female
N1045A 2
86115D-002
86115D-102
86115D-142
86115D-282
86115D-004
Two optical channels with filters for all rates listed (8.5 to
14.025 Gb/s)
Identical capability as 86115D-002, 14.025 Gb/s filters
not included
Identical capability as 86115D-002, only filters provided
N1045A-02F
N1045A-02M 2 channel remote head, 1.85 mm, male
N1045A-04F 4 channel remote head, 1.85 mm, female
N1045A-04M 4 channel remote head, 1.85 mm, male
N1046A
100 GHz, 1/2/4 port electrical remote sampling head
are 14.025 Gb/s
N1046A-71F
N1046A-81F
N1046A-11F
N1046A-72F
N1046A-82F
N1046A-12F
N1046A-74F
N1046A-84F
N1046A-14F
1 channel, 75 GHz remote head, 1 mm, female
1 channel, 85 GHz remote head, 1 mm, female
1 channel, 100 GHz remote head, 1 mm, female
2 channel, 75 GHz remote head, 1 mm, female
2 channel, 85 GHz remote head, 1 mm, female
2 channel, 100 GHz remote head, 1 mm, female
4 channel, 75 GHz remote head, 1 mm, female
4 channel, 85 GHz remote head, 1 mm, female
4 channel, 100 GHz remote head, 1 mm, female
Two optical channels with filters for 15, 25.78, 27.95,
28.05 Gb/s (contact Keysight for 14.025 Gb/s filter) 4
Four optical ports with filters for all rates listed (8.5
to 14.025 Gb/s) mulitplexed to two optical channels
through 2 integral 1X2 optical switches
Identical capability as 86115D-004, 14.025 Gb/s filters
not included
86115D-104
86115D-144
Identical capability as 86115D-004, only filters provided
are 14.025 Gb/s
TDR/TDT modules
54754A 1, 5
Differential TDR module with dual 18 GHz TDR/electrical
86115D-IRC
86116C 1, 2
System impulse response correction calibration
40 to 65 GHz optical/80 GHz electrical sampling module,
1300 to 1620 nm
channels
N1055A 1, 2
35/50 GHz, 2/4 port, TDR/TDT remote head
Fast sampling, mandatory option
35 GHz, 2 channel remote head, 2.92 mm, female
35 GHz, 2 channel remote head, 2.92 mm, male
35 GHz, 4 channel remote head, 2.92 mm, female
86116C-IRC 3
System impulse response correction calibration
N1055A-FS1
N1055A-32F
N1055A-32M
N1055A-34F
This module is not compatible with the 86100A and 86100B DCA
mainframes. If you want to upgrade older DCAs, contact Keysight
Technologies to discuss current trade-in deals. All optical modules
have FC/PC connectors installed on each optical port. Other connector
adapters available as options are: Diamond HMS-10, DIN, ST and SC.
Select exactly one reference receiver option:
N1055A-34M 35 GHz, 4 channel remote head, 2.92 mm, male
N1055A-52F
N1055A-52M
N1055A-54F
50 GHz, 2 channel remote head, 1.85 mm, female
50 GHz, 2 channel remote head, 1.85 mm, male
50 GHz, 4 channel remote head, 1.85 mm, female
86116C-025
40 GHz optical/80 GHz electrical channels,
17.0/25.8/27.7 Gb/s reference receiver
65 GHz optical/80 GHz electrical channels,
39.81/41.25/43.02 Gb/s reference receiver
N1055A-54M 50 GHz, 4 channel remote head, 1.85 mm, male
N1055A-FS1 Fast sampling
86116C-041
1. 86100D-ETR is recommended when;
a. More than 1 TDR module is connected to the same DUT.
b. Using a DCA module equipped with a rear-panel trigger circuit.
Examples include 54754A, 83496x, and 86108A/B modules. If
operating these modules in an 86100D with Option STR, an external
cable (such as P/N 5062-6690) must be connected from the module’s
front panel trigger/clock output to the 86100D’s trigger input.
2. Requires 86100D mainframe (not compatible with 86100A/B/C).
3. This module is not compatible with the 86100A and 86100B DCA
mainframes. If you want to upgrade older DCAs, contact Keysight
Technologies to discuss current trade-in deals.
4. Supports both DCA-X and DCA-M platforms. For detailed
N1076A/N1077A specifications, refer to the data sheet located at
www.keysight.com/find/N1077A. Standalone clock recovery instruments
are controlled via a USB connection to an 86100D DCA-X mainframe or a
user-supplied PC running N1010A FlexDCA software.
5. Included with each of these TDR modules is a TDR trigger cable, two 50 Ω
SMA terminations and one SMA short.
KEYSIGHT [ Keysight Technologies ]
