34 | Keysight | Infiniium DCA-X 86100D Wide-Bandwidth Oscilloscope Mainframe and Modules - Data Sheet
Ordering Information (Continued)
Infiniimax I connectivity kits (popular collections of the above
probe heads)
Probe adapters
N5477A
Sampling scope adapter. Adapts the Infiniimax III system
probes to the 86100 Infiniium DCA
Adapts 113x/115x/116x active probes to 86100 Infiniium
DCA
E2669A
E2668A
InfiniiMax connectivity kit for differential measurements
InfiniiMax connectivity kit for single-ended measurements
N1022B
Infiniimax II active probes (10 to 13 GHz)
Note: The N1022B probe adapter is required to use these probes with
the 86100 DCA
Infiniimax II probe amplifiers
Note: Order 1 or more Infiniimax II probe heads for each amplifier.
Infiniimax I probe heads and connectivity kits can also be used but
will have limited bandwidth
The N1022A/B and N5477A adapters are powered by connecting it to the
built-in probe power connector available on some DCA modules or to an
external probe power supply. On modules that do not have a built-in probe
power connector, use an 1143A external power supply. It is recommended
to order option 001 on the 1143A, which provides a 5-foot power
extension cable (01143-61602). The 1143A power supply can power two
probes. The N1022A/B and N5477A adapters are compatible with male
3.5 mm NMD bulkhead inputs. Insert an 85130-60010 2.4 mm female
NMD to 3.5 mm male NMD adapter in order to use them for 2.4 mm NMD
bulkhead inputs.
1168A
1169A
10 GHz probe amp
13 GHz probe amp
Infiniimax II probe heads
N5380A
N5381A
N5382A
InfiniiMax II 12 GHz differential SMA adapter
InfiniiMax II 12 GHz solder-in probe head
InfiniiMax II 12 GHz differential browser
Connectivity solutions
For a wide range of test adapters to connect to one or more lanes for
SFP+, QSFP+, fibre channel, PCIe and many others, please see adapters
information from Wilder Technologies at: http://www.wilder-tech.com/
Call Keysight for connectivity and probing solutions not listed above.
Infiniimax III active probes (16 to 30 GHz)
Note: The N5477A probe adapter is required to use these probes with
the 86100 DCA
Infiniimax III probe amplifiers
Firmware and software
Firmware and software upgrades are available through the Web or your
local sales office. www.keysight.com/find/dcax
N2800A
N2801A
N2802A
N2803A
16 GHz probe amp
20 GHz probe amp
25 GHz probe amp
30 GHz probe amp
N1010A FlexDCA Remote Access Software FlexDCA Pro runs on the
86100D as well as on a PC or laptop. Software licenses allow connectivity
to an 86100C or D mainframe, advanced analysis or productivity
packages, and more. http://www.keysight.com/find/flexdca_download
Infiniimax III probe heads
N5439A
N5440A
N5447A
N5444A
N5448A
N5441A
N5445A
ZIF probe head
450 Ω ZIF tip
200 Ω ZIF tip
2.92 mm/3.5 mm/SMA
2.92 mm extension cables
Solder-in probe head
Browser probe head
FlexDCA express is the same as FlexDCA Pro except that it does not
included any functionality requiring a license. It is available free of charge
from http://www.keysight.com/find/flexdca_express
86100D DCA-X brochure
For more information on the features and benefits of the 86100D DCA-X
and DCA modules, download the 86100D DCA-X brochure. Go to:
www.keysight.com and search on 5989-5822EN.
www.keysight.com/find/infiniimax3
KEYSIGHT [ Keysight Technologies ]
