05 | Keysight | 6640A Series Single-Output, 200 W DC Power Supplies, GPIB - Data Sheet
AC input:
(AC input frequency 47 to 63 Hz)
Supplemental characteristics
for all model numbers
Voltage
Current
100 VAC
4.4 A
120 VAC
3.8 A
220 VAC
2.2 A
240 VAC
2.0 A
DC floating voltage: Output terminals can be floated up to 240
VDC from chassis ground
InpInput power: 480 VA, 400 W at full load; 60 W at no load
Remote sensing: Up to half the rated output voltage can be
dropped in each load lead. The drop in the load leads subtracts
from the voltage available for the load.
GPIB interface capabilities: SH1, AH1, T6, L4, SR1, RL1, PP0, DC1,
DT1, E1, and C0. IEEE-488.2 and SCPI-compatible command set
Command processing time: Average time required for the output
voltage to begin to change following receipt of digital data is 20
ms for the power supplies connected directly to the GPIB
Software driver:
– IVI-COM
– VXIplug&play
Output programming response time: The rise and fall time
(10/90% and 90/10%) of the output voltage is less than 15 ms.
The output voltage change settles within 1 LSB (0.025% x rated
voltage) of final value in less than 60 ms.
Regulatory compliance: Conforms to UL 1244 and IEC61010-1.
Size: 425.5 mm W x 88.1 mm H x 439 mm D (16.75 in x 3.5 in x 17.3 in)
Weight: Net, 14.2 kg (31.4 lb); shipping, 16.3 kg (36 lb)
Warranty: One year
Down programming: An active down programmer sinks approxi-
mately 20% of the rated output current
Modulation: (Analog programming of output voltage and current)
Input Signal: 0 to –5 V
Input Impedance: 10 kΩ nominal
Keysight Models: 6641A, 6642A, 6643A, 6644A, 6645A
Top
421.7 mm
16.6"
± ±240 VDC Max to
+
–
425.5 mm
16.75"
6 - 32 x 3/8 Screws
A Thomas & Betts 22-18 ring
crimp-on will fit in this area
{
}
Terminal screw size: m4 x 0.7 x 8 mm
434.3 mm
17.1"
12.7 mm
0.5"
88.1 mm
3.5"
100 mm
3.93"
Rear
Side
Output