31 | Keysight | 34980A Multifunction Switch/Measure Unit - Data Sheet
General speciꢀcations
Keysight BenchLink data logger features
Power supply
Universal 100 V to 240 V ± 10%
50 – 60 Hz ± 10% automatically sensed
150 VA
Conꢀguration
Spreadsheet-like channel conꢀgurations page.
Power line frequency
Power consumption
Operating environment
Upload and Download instrument conꢀgurations.
Computed channels using + - */, dB, dBm, dBV,
x2, x and full, ½ , or ¼ bridge strain
Full accuracy for 0 °C to 55 °C
Full accuracy to 80% R.H. at 40 °C
IEC 60664-1 pollution degree 1
–40°C to 70°C [1]
Graphical Displays
Real-time and historical data displays Add,
delete, size, and conꢀgure real time Strip chart
with markers and alarm indication, bar and
scatter charts, Histogram with statistics, Bar
meter, and Data table
Storage environment
Mainframe dimensions
133 H x 426 W x 341 D mm (5.25" x 16.8" x 14")
Full rack, 3 units high
Graphical Controls
Sliders, switches, buttons, and LED lights
Mainframe weight
Module dimensions
Module weights
8.8 kg (19.6 lbs)
Alarm / Limit testing Start/Stop scanning on alarm condition
Control 34903A relay state or 34907A digital
output on alarm
280 H x 170 W x 27 D mm (11" x 6.7" x 1")
0.73 to 1.18 kg (1.6 to 2.6 lbs)
Terminal block dimensions 28 H x 170 W x 114 D mm (1.1" x 6.7" x 4.5")
Data
Real time streamed (saved) to disk
Automatically export data and conꢀgurations
Copy data or graphics to windows clipboard
Export your selected data to .CVS, .XML, or
TXT formats
Terminal block weights
Safety conforms to
EMC conforms to
Warranty
0.27 to 0.36 kg (0.6 to 0.8 lbs)
CSA, UL/IEC/EN 61010-1
IEC/EN 61326-1, CISPR 11
1 year
Event logging
Automatic entry of alarms and errors
Software
[1] Storage at temperatures above 40 °C will decrease battery life
Keysight connectivity software included
[2] Load IO Libraries Version M for Windows NT support or version 14.0 for
Keysight IO Libraries Suite 14 or greater (E2094)
Minimum system requirements (IO libraries and drivers)
Windows 98 SE support
PC hardware
Intel Pentium 100 MHz, 64 Mbyte RAM,
210 Mbyte disk space
Deꢁnitions for speciꢁcations
Speciꢁcations describe the warranted performance of calibrated
instruments that have been stored for a minimum of 2 hours
within the operating temperature range of 0 °C to 50 °C, unless
otherwise stated, and after a 45 minute warm-up period.
Data represented in this document are speciꢁcations unless
otherwise noted.
Display 800 x 600, 256 colors, CD-Rom drive
Operating system [2]
Computer interfaces
Windows 98 SE/NT/2000/XP
Standard LAN 10BaseT/100BaseTx
Standard USB 2.0
IEEE 488.2 GPIB
Software driver support for programming languages
Software drivers: IVI-C and IVI COM for Windows NT/2000/
XP LabVIEW
Compatible with programming tools and environments:
Keysight VEE Pro, Keysight T&M Toolkit
Characteristics describe product performance that is useful in
the application of the product, but that is not covered by the
product warranty. Characteristics are often referred to as Typical
or Nominal values.
– Typical describes characteristic performance, which 80% of
instruments will meet when operated over a 20 °C to 30 °C
temperature range. Typical performance is not warranted.
– Nominal describes representative performance that is
useful in the application of the product when operated over
a 20 °C to 30 °C temperature range. Nominal performance
is not warranted.
(requires Visual Studio.NET)
National Instruments Test Stand,
Measurement Studio, LabWindows/CVI,
LabVIEW, Switch Executive
Microsoft Visual Studio.NET, C/C++,
Visual Basic 6
Keysight BenchLink data logger software system requirements
NOTE: All graphs contain measured data from several units at
room temperature unless otherwise noted.
Operating system:
Controller:
Windows 2000 SP4, XP SP 2
Recommend Pentium 4, 800 MHz or greater,
Min: Pentium III, 500 MHz
RAM:
Recommend 256 MB or greater, Min 128 MB
Recommend 200 MB, Min 100 MB
1024x768 resolution, 256 colors
Disk Space:
Display: