18 | Keysight | 16860A Series Portable Logic Analyzers - Data Sheet
16860A Series Probing Options (Continued)
DDR/LPDDR interposers and probes
The following provides a high-level overview of memory probing components and 16860A
Series logic analyzer compatibility. To ensure you order the correct quantity and combination of
components for your specific DDR/LPDDR implementation, refer to the data sheet for a specific
component for more detailed information. The following include 16860A Series configuration
files for easy setup. Refer to page 5 for logic analyzer state speed option requirements.
DRAMs, DIMMs and SO-DIMMs operating at ≤ 1400 MT/s
Form factor
Signal access 1 Requires component, qty
16860A Series compatibility
16862A 2 16863A 2 16864A
x4/x8, 78-ball
Command,
Address, Control
and Data 1
Command,
Address, Control
and Data 1
– W3633A BGA interposer, 1
– E5847A ZIF probe, 1
– U4201A cable, 2
– W3631A BGA interposer, 1
– E5845A ZIF probe, 1
– U4201A cable, 2
– W3636A BGA interposer, 1
– E5845A ZIF probe, 1
– U4201A cable, 3
√
√
√
√
√
√
√
√
√
x16, 96-ball,
stacked die
under 2G
x16, 96-ball,
non-stacked die, Address, Control
2
Command,
No data
all depths
and Data 1
DIMM
240-pin DDR3
SDRAM DIMM
2
2
Command,
Address, Control
and Partial
Data 1
Command,
Address, Control
(No data)
– FS2352B DIMM
interposer, 1
– U4201A cable, 4
√
√
√
√
√
√
√
√
√
240-pin DDR3
SDRAM DIMM
– FS2372 DIMM interposer, 1
– U4201A cable, 4
√
SO-DIMM
240-pin
DDR3 SDRAM
SO-DIMM
2
2
2
Command,
Address, Control
and Partial
Data 1
Command,
Address, Control
(No data)
– FS2354 DIMM interposer, 1
– Cables connection to logic
analyzer included standard
with interposer
– FS2374 SO-DIMM
interposer, 1
√
2
240-pin
DDR3 SDRAM
SO-DIMM
√
– U4201A cable, 4
1. Refer to the data sheet for a given interposer for information on specific signal access.
2. The required U4201A cables may be more than what a given 16860A Series logic analyzer will support. If the
number of U4201A cables is more than what the analyzer supports, some signals will not be available for that
model. The maximum number of U4201A cables per analyzer are two for the 16862A, three for the 16863A
and four for the 16864A.