68 | Keysight | Probing Solutions for Logic Analyzers - Data Sheet
Probing Solutions for 40-pin Logic Analyzers
Mictor and Samtec Probing (Continued)
Support shrouds
Table 7. Mating connectors, shrouds, and kits for Keysight E5339A,
E5346A, E5351A, and E5385A probes
A support shroud is recommended to
provide additional strain relief between
the probe and the connector, as shown
in Figures 9.27 and 9.29. Two plated
through-holes are required on the target
board. The shroud is mounted directly
to the target board using the through-
holes. This places the shroud around the
connector, providing solid mechanical
strain relief. Connector kits are available;
Table 1 shows the Keysight part numbers
for shrouds and connector kits for various
PC board thicknesses.
For probe model Description
numbers
Keysight part
number
E5346-68701
E5339A,
Kit of five support shrouds and five 38-pin Mictor connectors
E5346A, E5351A for PC board thickness up to 1.57 mm (0.062”)
Kit of five support shrouds and five 38-pin Mictor connectors
for PC board thickness up to 3.175 mm (0.125”)
E5346-68700
One 38-pin Mictor connector (also available from AMP as part 1252-7431
number 2-767004-2)
One support shroud for PC board thickness up to 1.57 mm
(0.062”)
One support shroud for PC board thickness up to 3.175 mm
(0.125”)
One support shroud for PC board thickness up to 4.318 mm
(0.700”)
E5346-44701
E5346-44704
E5346-44703
16760-68702
16760-68703
E5385A
Kit of five support shrouds and five 100-pin Samtec
connectors for PC board thickness up to 1.57 mm (0.062”)
Kit of five support shrouds and five 100-pin Samtec
connectors for PC board thickness up to 3.05 mm (0.120”)
One 100-pin Samtec connector (also available from Samtec as 1253-3620
part number ASP-65067-01)
One support shroud for PC board thickness up to 1.57 mm
16760-02302
(0.062”)
One support shroud for PC board thickness up to 3.05 mm
(0.120”)
16760-02303
0.64
0.025
Figure 9.33. Mechanical information for E5346-44701, E5346-44703, E5346-44704 support shrouds for 38-pin Mictor connectors.