欢迎访问ic37.com |
会员登录 免费注册
发布采购

16517-82109 参数 Datasheet PDF下载

16517-82109图片预览
型号: 16517-82109
PDF下载: 下载PDF文件 查看货源
内容描述: [Probing Solutions for Logic Analyzers]
分类和应用:
文件页数/大小: 77 页 / 6162 K
品牌: KEYSIGHT [ Keysight Technologies ]
 浏览型号16517-82109的Datasheet PDF文件第13页浏览型号16517-82109的Datasheet PDF文件第14页浏览型号16517-82109的Datasheet PDF文件第15页浏览型号16517-82109的Datasheet PDF文件第16页浏览型号16517-82109的Datasheet PDF文件第18页浏览型号16517-82109的Datasheet PDF文件第19页浏览型号16517-82109的Datasheet PDF文件第20页浏览型号16517-82109的Datasheet PDF文件第21页  
17 | Keysight | Probing Solutions for Logic Analyzers - Data Sheet  
Probing Solutions for 90-pin Logic Analyzers  
Soft Touch Connectorless Probing  
Several options are available for connecting Keysight logic analyzers with 90-pin pod  
connectors to a target system using mass connections.  
Keysight Pro Series soft touch connectorless logic analyzer probes  
Keysight has developed connectorless logic analyzer probes based on soft touch  
probing technology. Connectorless logic analyzer probing removes the connector that  
is traditionally attached to the target board and replaces it with an array of probe pads.  
This reduces the probe load on the target by eliminating the loading associated with  
the physical body of the connector. Additionally, this streamlines the design flow by  
eliminating the need to assign a logic analyzer connector to the bill of material of your  
board, procuring those connectors and then having them loaded onto your board.  
Keysight’s soft touch connectorless probes use micro spring-pin technology to provide  
reliable contact which is not dependent on the planarity of the PC board or the plating  
processes used to fabricate the board. No special cleaning processes are required when  
using Keysight’s soft touch probes.  
The new Keysight Pro Series soft touch connectorless probes offer a 30% smaller  
footprint than the original soft touch probes and are the basis for the industry standard  
connectorless probing footprint.  
The probes use a retention module that ensures soft touch pin-to-PC board pad  
alignment and holds the probe in place while in use. The Pro Series soft touch uses a  
“top-side” mountable retention module. The retention module is mounted on the same  
side of the board as the probing footprint so there is no need to access the back-side  
of the board. Because there is no requirement for the retention module pins to extend  
beyond the back-side of the board, the retention module is compatible with virtually any  
board thickness.  
Insert  
Solder pins from  
top of board  
Figure 4.7. Top-side” mountable retention module.  
 复制成功!