41 | Keysight | Probing Solutions for Logic Analyzers - Data Sheet
U4206A Probe, 34 Channel, Soft Touch Pro, Single-Ended, to Four 160-pin Direct
Connect to Logic Analyzer Front Panel Connectors (Continued)
U4206A probe cable
34 channel, soft touch pro, single-ended,
quad x 160-pin direct connect
Quick start and accessory guide
Soft touch pro
retention module
Socket adapter
3-pin header
Tip resistor
82 ohm coaxial
82 ohm resistor
template
Kit of 34 pieces
E5381-82102
Kit of 34 pieces
E5381-82104
Kit of 34 pieces
E5381-82101
Kit of 5 pieces
E5405-68702
1 piece
01131-94309
Figure 6.3. U4206A probe cable accessories.
CONNECT PODS TO LOGIC
ANALYZER
APPLY SOFT TOUCH PRO RETENTION
MODULE TO SYSTEM UNDER TEST
CONNECT PROBE CABLE TO SOFT
TOUCH PRO RETENTION MODULE
1
2
3
U4206A
connector pod - to - LA connector
Insert
Solder pins from
top of board
Soft touch pro
probe cable
Pod 1
Pod 3
Pod 5
Pod 7
Pods 1/2
Pods 3/4
Pods 5/6
Pods 7/8
Retentio
module
CLOCK QUALIFIER CONNECTIONS ARE MADE USING THE INCLUDED ACCESSORIES
Coaxial tip resistor 82 Ohm
3-pin header
Socket adapter
Solder attach To:
.
.
.
.
Components
Traces
Pads
VIAs
Total lumped input C 0.9 pF
Total lumped input C 1.0 pF
Total lumped input C 1.1 pF
Figure 6.4. U4206A connections and probe cable details.
Clock qualifier connections
Pin Protector
Extra E5390-25201 Pin
Protectors are included
PROBE CABLE ASSEMBLY
Soft touch pro
connector
Logic analyzer
connection pods
DO NOT DISCARD THIS
PIN PROTECTOR
To protect the Soft
Touch Pro pins from
being damaged, use the
Pin Protector when
probe is not connected.
Figure 6.5. U4206A probe cable.