AUIRFR6215
D-Pak (TO-252AA) Tape & Reel Information
Dimensions are shown in millimeters (inches)
TR
TRL
TRR
16.3 ( .641 )
15.7 ( .619 )
16.3 ( .641 )
15.7 ( .619 )
12.1 ( .476 )
11.9 ( .469 )
8.1 ( .318 )
7.9 ( .312 )
FEED DIRECTION
FEED DIRECTION
NOTES :
1. CONTROLLING DIMENSION : MILLIMETER.
2. ALL DIMENSIONS ARE SHOWN IN MILLIMETERS ( INCHES ).
3. OUTLINE CONFORMS TO EIA-481 & EIA-541.
13 INCH
16 mm
NOTES :
1. OUTLINE CONFORMS TO EIA-481.
Notes:
ꢀ This is applied for I-PAK, LS of D-PAK is measured between lead
and center of die contact
Uses IRF6215 data and test conditions
When mounted on 1" square PCB (FR-4 or G-10 Material ) For
recommended footprint and soldering techniques refer to
application note #AN-994
Repetitive rating; pulse width limited by
max. junction temperature. ( See fig. 11 )
Starting TJ = 25°C, L = 14mH RG = 25Ω, IAS = -6.6A. (See Fig.12)
ISD ≤-6.6A, di/dt ≤ -620A/µs, VDD ≤ V(BR)DSS, TJ ≤ 175°C
Pulse width ≤ 300µs; duty cycle ≤ 2%
R is measured at TJ approximately 90°C.
θ
10
www.kersemi.com
KERSEMI [ Kersemi Electronic Co., Ltd. ]
