AUIRFR2905Z
D-Pak (TO-252AA) Tape & Reel Information
Dimensions are shown in millimeters (inches)
TR
TRL
TRR
16.3 ( .641 )
15.7 ( .619 )
16.3 ( .641 )
15.7 ( .619 )
12.1 ( .476 )
11.9 ( .469 )
8.1 ( .318 )
7.9 ( .312 )
FEED DIRECTION
FEED DIRECTION
NOTES :
1. CONTROLLING DIMENSION : MILLIMETER.
2. ALL DIMENSIONS ARE SHOWN IN MILLIMETERS ( INCHES ).
3. OUTLINE CONFORMS TO EIA-481 & EIA-541.
13 INCH
16 mm
NOTES :
1. OUTLINE CONFORMS TO EIA-481.
Notes:
ꢀ Limited by TJmax , see Fig.12a, 12b, 15, 16 for typical repetitive
avalanche performance.
Repetitive rating; pulse width limited by
max. junction temperature. (See fig. 11).
Limited by TJmax, starting TJ = 25°C, L = 0.08mH
This value determined from sample failure population. 100%
tested to this value in production.
RG = 25Ω, IAS = 36A, VGS =10V. Part not
recommended for use above this value.
Pulse width ≤ 1.0ms; duty cycle ≤ 2%.
Coss eff. is a fixed capacitance that gives the
same charging time as Coss while VDS is rising
When mounted on 1" square PCB (FR-4 or G-10 Material) .
application note #AN-994
Rθ is measured at TJ approximately 90°C
Calculated continuous current based on maximum allowable
junction temperature. Package limitation current is 42A
from 0 to 80% VDSS
.
www.kersemi.com
11
KERSEMI [ Kersemi Electronic Co., Ltd. ]
