IRF3205Z/ZS/ZL
D2Pak Tape & Reel Information
TRR
1.60 (.063)
1.50 (.059)
1.60 (.063)
1.50 (.059)
4.10 (.161)
3.90 (.153)
0.368 (.0145)
0.342 (.0135)
FEED DIRECTION
TRL
11.60 (.457)
11.40 (.449)
1.85 (.073)
1.65 (.065)
24.30 (.957)
23.90 (.941)
15.42 (.609)
15.22 (.601)
1.75 (.069)
1.25 (.049)
10.90 (.429)
10.70 (.421)
4.72 (.136)
4.52 (.178)
16.10 (.634)
15.90 (.626)
FEED DIRECTION
13.50 (.532)
12.80 (.504)
27.40 (1.079)
23.90 (.941)
4
330.00
(14.173)
MAX.
60.00 (2.362)
MIN.
30.40 (1.197)
MAX.
NOTES :
1. COMFORMS TO EIA-418.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSION MEASURED @ HUB.
26.40 (1.039)
24.40 (.961)
4
3
4. INCLUDES FLANGE DISTORTION @ OUTER EDGE.
Notes:
ꢀ
Limited by TJmax , see Fig.12a, 12b, 15, 16 for typical repetitive
avalanche performance.
Repetitive rating; pulse width limited by
max. junction temperature. (See fig. 11).
Limited by TJmax, starting TJ = 25°C, L = 0.08mH
This value determined from sample failure population. 100%
tested to this value in production.
RG = 25Ω, IAS = 66A, VGS =10V. Part not
recommended for use above this value.
Pulse width ≤ 1.0ms; duty cycle ≤ 2%.
Coss eff. is a fixed capacitance that gives the
same charging time as Coss while VDS is rising
This is only applied to TO-220AB pakcage.
This is applied to D2Pak, when mounted on 1" square PCB (FR-
4 or G-10 Material). For recommended footprint and soldering
techniques refer to application note #AN-994.
from 0 to 80% VDSS
.
TO-220AB package is not recommended for Surface Mount Application.
12 / 12
www.kersemi.com