KEMET®
CERAMIC LEADED
PACKAGING INFORMATION
Ceramic Axial
Figure 1
Lead Tape and Reel Packaging
KEMET offers standard reeling of Molded and Conformally
Coated Axial Leaded Ceramic Capacitors for automatic insertion
or lead forming machines per EIA specification RS-296.
®
Paper (50 lb.) test minimum is inserted between the layers of
capacitors wound on reels for component pitch ≤ 0.400".
Capacitor lead length may extend only a maximum of .0625"
(1.59mm) beyond the tapes' edges. Capacitors are centered in a
row between the two tapes and will deviate only ± 0.031
(0.79mm) from the row center. A minimum of 36" (91.5 cm) leader
tape is provided at each end of the reel capacitors. Universal
splicing clips are used to connect the tape. Standard reel
quantities are shown on page 34.
KEMET
®
KEMET
Adhesive Tape
Adhesive Tape
Kraft Paper
Interleaving
Figure 2
Figure 3
10.5" - 14"
(26.67 -
35.56cm)
.059" to .315"
Greater Than
Component
Length
*
.047" Max
(1.20)
Hub
See Table 1 (A)
1
3 / "
4
*
(82.6)
.655" ±0.010"
(16.6 ±0.25)
1
/ "
8
.250" Nom.
(6.35)
(3.18)
See Table 1
(B)
Dimensions in Inches & (Millimeters)
Table 1
Component
Body Diameter
Component
Pitch "A"
Inside Tape Spacing "B"
± 1.5mm (0.059")
0.020" or (±0.5mm)
I
III*
0" (0mm) to 0.197" (5mm)
0.197" or (5mm)
0.394" or (10mm)
2.062" (52.4mm)
0.197" (5.01mm) to 0.394: (10mm)
2.874" (73mm)
* Not Available for Conformally Coated Parts.
32
KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
KEMET [ KEMET CORPORATION ]
