Film Capacitors
General Purpose, Pulse and DC Transient Suppression – R76 Series Double Metallized Polypropylene Film/Foil, Radial
Soldering Process
The implementation of the RoHS Directive has required the selection
SnAuCu (SAC) alloys or SnCu alloys as primary solder. This has
increased the liquidus temperature from that of 183ºC for SnPb
eutectic alloy to 217ºC – 221ºC for the new alloys. As a result, the
heat stress to components, even in wave soldering, has increased
considerably due to higher pre-heat and wave temperatures.
Polypropylene capacitors are especially sensitive to heat (melting
point of polypropylene is 160ºC – 170ºC). Wave soldering can
be destructive especially for mechanically small polypropylene
capacitors and great care must be taken during soldering. The solder
profiles from KEMET are highly recommended. You may also refer
to the wave soldering curve from IEC Publication 61760–1 Edition 2.
Please consult KEMET with any questions.
Marking
• KEMET’s logo
• Series
• Dielectric code (MKP)
• Capacitance
• Capacitance tolerance
• Rated DC voltage
• Manufacturing date code
Packaging Quantities
Lead
Spacing
Thickness Height Length
Bulk
Bulk
Standard Reel Large Reel
Ammo Pizza
(mm)
(mm)
(mm)
Short Leads Long Leads
ø 355 mm
ø 500 mm
3
4
5
6
8
10
1500
2000
1500
1000
1750
1500
1000
800
2100
2800
2100
1600
1350
9
10
1500
7.5
10
10.5
12
10
1200
10
1000
4
5
6
9
13
13
13
2000
1300
1000
2200
2000
1800
750
600
500
1500
1250
1000
1000
800
11
12
680
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3034_R76 • 9/10/2012 16