Film Capacitors
General Purpose, Pulse and DC Transient Suppression – A72 Series Polypropylene Film/Foil, Axial
Table 1 – Ratings & Part Number Reference
VDC
2000
2000
2000
2000
2000
VAC
500
500
500
500
500
Capacitance Dimensions in mm
Value (µF)
D Max
L Max
0.01
0.015
0.022
0.033
0.047
13.0
13.5
16.0
20.0
22.5
28.0
33.0
33.0
33.0
33.0
dV/dt
(V/µs)
9800
7000
7000
7000
7000
Max K
0
(V
2
/µs)
39 E3
28 E3
28 E3
28 E3
28 E3
New KEMET
Part Number
72UQ2100(1)00(2)
72UT2150(1)00(2)
72UT2220(1)00(2)
72UT2330(1)00(2)
72UT2470(1)00(2)
Legacy Part Number
A72UQ2100(1)00(2)
A72UT2150(1)00(2)
A72UT2220(1)00(2)
A72UT2330(1)00(2)
A72UT2470(1)00(2)
VDC
VAC
Capacitance
Value (µF)
B (mm)
H (mm)
dV/dt
(V/µs)
Max K
0
(V
2
/µs)
New KEMET Part Number
Legacy Part Number
(1) Insert lead and packaging code. See Ordering Options Table for available options.
(2) J = 5%, K = 10%, M = 20%.
Soldering Process
The implementation of the RoHS Directive has required the selection
SnAuCu (SAC) alloys or SnCu alloys as primary solder. This has
increased the liquidus temperature from that of 183ºC for SnPb
eutectic alloy to 217ºC – 221ºC for the new alloys. As a result, the
heat stress to components, even in wave soldering, has increased
considerably due to higher pre-heat and wave temperatures.
Polypropylene capacitors are especially sensitive to heat (melting
point of polypropylene is 160ºC – 170ºC). Wave soldering can
be destructive especially for mechanically small polypropylene
capacitors and great care must be taken during soldering. The solder
profiles from KEMET are highly recommended. You may also refer
to the wave soldering curve from IEC Publication 61760–1 Edition 2.
Please consult KEMET with any questions.
Marking
•
•
•
•
•
•
KEMET’s logo
Series
Dielectric code MKP
Capacitance
Capacitance tolerance
Rated DC voltage
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3039_A72_AXIAL • 4/4/2013
8
Roll Over for
Order Info.