Film Capacitors – General Purpose, Pulse and DC Transient Suppression
F5B Series Metallized Polyester Film with Integrated Suppression Diode, 18 – 63 VDC
Maximum Soldering Temperature
• Set the temperature so that inside the element the maximum temperature is below 160°C
• Solder within the following temperature profiles, especially for iron soldering:
General Conditions
• If two solderings are needed, please apply a recovery time until the temperature on the capacitor surface is below 50°C.
• Avoid any passing through adhesive curing oven when fixing surface mount parts in combination with through-hole parts. Insert
through-hole parts only after the curing of surface mount parts.
• Avoid reflow soldering by combining the lead type with surface mount parts
Marking
• Capacitance
• Tolerance
• DC rated voltage
• Series (F5B)
• Manufacturing date code
Packaging Quantities
Bulk
Bulk
Standard Reel
ø 355 mm
1400
Lead Spacing Thickness (mm) Height (mm) Length (mm)
Ammo
Short Leads Long Leads
4.6
5.1
6.1
7.3
9.6
10.1
11.1
13.1
7.4
7.5
7.5
7.5
1500
1000
2000
1500
2000
1500
1000
750
1900
1700
1400
1150
1200
5
1000
800
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3069_F5B • 4/3/2013
8
KEMET [ KEMET CORPORATION ]
