Film Capacitors – General Purpose, Pulse and DC Transient Suppression
F5A Series Metallized Polyester Film with Integrated Ceramic Varistor, 18 – 63 VDC
Maximum Soldering Temperature
• Set the temperature so that inside the element the maximum temperature is below 160°C
• Solder within the following temperature profiles, especially for iron soldering:
General Conditions
• If two solderings are needed, please apply a recovery time until the temperature on the capacitor surface is below 50°C.
• Avoid any passing through adhesive curing oven when fixing surface mount parts in combination with through-hole parts. Insert
through-hole parts only after the curing of surface mount parts.
• Avoid reflow soldering by combining the lead type with surface mount parts
Marking
•
•
•
•
•
Capacitance
Tolerance
DC rated voltage
Series (F5A)
Manufacturing date code
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3068_F5A • 4/4/2013
9
KEMET [ KEMET CORPORATION ]
