Film Capacitors – AC Line EMI Suppression and RC Networks
R46 + R Series Metallized Polypropylene Film, Class X2, 275 VAC/300 VAC with Internal Discharging Resistor
Performance Characteristics
Rated Voltage
Capacitance Range
Capacitance Tolerance
Temperature Range
Climatic Category
Approvals
Dissipation Factor
275 VAC 50/60 Hz
0.22 – 10 µF
±20%, ±10%, ±5% on request
-40ºC to +110°C
40/110/56
ENEC, UL, cUL
Maximum Values at +23°C
1 kHz
0.1%
The 100% screening factory test is carried out at 2,200 VDC/1,500 VAC.
The voltage level is selected to meet the requirements in applicable
equipment standards. All electrical characteristics are checked after the
test. It is not permitted to repeat this test as there is a risk to damage the
capacitor. KEMET is not liable in such case for any failures.
Minimum Values Between Terminals
Insulation Resistance
C ≤ 0.33 µF
C > 0.33 µF
In DC Applications
Recommended voltage ≤ 560/630 VDC
≥ 50,000 MΩ
≥ 30,000 MΩ • µF
Test Voltage Between Terminals
Impedance Graph
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3007_R46-R_X2_275-310 • 4/4/2013
4
KEMET [ KEMET CORPORATION ]
